Convenient wrench organizer
As they say, order should be everywhere. This also applies to your spouse’s tools. It is very easy to put things in order if you use an organizer for this. I suggest making your own organizer for wrenches. Now your accessories will be organized thanks to individual pockets. And the bag itself will take a very compact place among other tools.
01. To sew the organizer we will need a minimum of materials and time. I recommend using thick, wear-resistant fabrics such as raincoat or tarpaulin. I made it from thick denim. We will also need matching threads, scissors, a ruler and the wrenches themselves.
02. Decide on the size of the bag. To do this, you need to lay out all the keys in a row as they will lie in the finished product. That is, in descending order.
03. Now, using a ruler and chalk, mark the width for each pocket. The width of my largest pocket is about 7 cm. Further, in descending order, each pocket becomes narrower by 0.5 cm.
04. Keys can be removed. All that remains is to cut the pocket along the marked lines.
05. Cutting a pocket. I got the following.You may have different sizes depending on the number and height of the keys.
06. Cut out the resulting part and do not forget to add allowances for all cuts.
07. Fold the top edge of the pocket to the wrong side and hem it. For now we put it aside.
08. Let's work on the main part of the bag. We cut out the canvas according to the given diagram. The width of the organizer should be equal to the width of the pocket.
09. Cut out a rectangle and fold it in half.
10. Using pins, baste the pocket piece on top.
11. Sew using a sewing machine. We lay a line along each division on a turnkey basis. We fasten the ends of the lines.
12. Round and cut off the bottom corners.
13. Sew bias tape around the perimeter of the organizer. It can be cut from any suitable material. You can buy ready-made.
14. Done!
15. Trying it on.
16. The wrench organizer is ready! Now not a single key will be lost.
17. The handbag can be rolled up and put away until the next job.
We sew a organizer for wrenches with our own hands
01. To sew the organizer we will need a minimum of materials and time. I recommend using thick, wear-resistant fabrics such as raincoat or tarpaulin. I made it from thick denim. We will also need matching threads, scissors, a ruler and the wrenches themselves.
02. Decide on the size of the bag. To do this, you need to lay out all the keys in a row as they will lie in the finished product. That is, in descending order.
03. Now, using a ruler and chalk, mark the width for each pocket. The width of my largest pocket is about 7 cm. Further, in descending order, each pocket becomes narrower by 0.5 cm.
04. Keys can be removed. All that remains is to cut the pocket along the marked lines.
05. Cutting a pocket. I got the following.You may have different sizes depending on the number and height of the keys.
06. Cut out the resulting part and do not forget to add allowances for all cuts.
07. Fold the top edge of the pocket to the wrong side and hem it. For now we put it aside.
08. Let's work on the main part of the bag. We cut out the canvas according to the given diagram. The width of the organizer should be equal to the width of the pocket.
09. Cut out a rectangle and fold it in half.
10. Using pins, baste the pocket piece on top.
11. Sew using a sewing machine. We lay a line along each division on a turnkey basis. We fasten the ends of the lines.
12. Round and cut off the bottom corners.
13. Sew bias tape around the perimeter of the organizer. It can be cut from any suitable material. You can buy ready-made.
14. Done!
15. Trying it on.
16. The wrench organizer is ready! Now not a single key will be lost.
17. The handbag can be rolled up and put away until the next job.
Similar master classes
Particularly interesting
Comments (0)
