Wedding bottle-bride
Today, newlyweds very often prefer to decorate the festive table with decorated bottles. Let's try to make a bride bottle together.
For work we will need:
- a bottle of champagne
- white bias tape 6-7 meters
- white satin ribbon 5 cm wide
- scissors
- glue
- needle
- thread
- beads and artificial pearls
- ribbon rose
- narrow ribbon in rose color
- any plastic bottle
- rhinestones
We clean the bottle from the label. To do this, it is advisable to place it in a bucket of cold water and leave it overnight. If the champagne is of high quality, the label will come off without any problems in the morning. If you decide to remove the label under running water, do not use warm water. So, the bottle is cleaned, you can start!
We'll start by gradually covering the bottle with pieces of white bias tape. Let's start working from the neck. We measure out a piece sufficient to fit around the neck and glue it to the bottle. I use Moment glue, you can use a silicone gun if that's more convenient for you.
We repeat this procedure. We measure, cut and glue.
The bottom layer should slightly overlap the top layer.At this stage the glue is visible, but when it is completely dry it will not be visible.
The bottom of the bottle will be hidden under the skirt, i.e. it won't be visible. But I still decided to cover it with white wide tape so that the green bottom of the bottle wouldn’t show through from under the skirt.
And now you can finish the work with the bias tape by sealing the bottle to the white tape.
You can see in the photo that I made the last rows of bias tape slightly shortened. This will not be visible in finished form. At this stage, the main thing is to make a beautiful back for our bride.
Let's move on to the skirt. We take a white ribbon 5 cm wide and begin to string it onto a thread, forming soft waves.
Having obtained the required length of the tape, cut it, connect the edges and glue it to the bottle. This will be the bottom layer of our skirt.
We do the same for the second layer. Glue the second layer a few centimeters higher than the first.
Glue the third and last layer of the skirt in the same way. I think this will be enough. You can add as many layers as you like. In order to hide the not very beautiful top of the tape gathered on a thread, we glue one layer of bias tape on top of the seam, so the product will look neater.
We glue a contrasting narrow ribbon on top of the bias tape.
On the front side we will make a loop from a ribbon of the same contrasting color and glue it to our dress, as shown in the photo.
To give it a more finished look, glue on a white rose. This is how we decorated the dress.
Let's continue decor. To imitate buttons, I glue rhinestones at the junction of the layers of bias tape.
Well, that's it, the bride has been dressed, now she needs to be decorated with jewelry. To do this, we will make beads for her. I strung artificial pearls on a thread and alternated them with silver beads.
I tied it directly on the bottle, carefully cutting the ends of the thread.Let's start decorating the head. We will have a wide-brimmed hat on our head. To begin, we cover the neck of the bottle with short pieces of white bias tape. This will be the tip of our hat.
To hide the unevenness, glue one layer of bias tape to the neck, as shown in the photo.
Now we cut out the brim of the hat from any plastic bottle. The inner circle is equal to the diameter of the bottle neck + 2 or 3 mm. And the outer circle will depend on how wide the brim of the hat is. My margins are about 1.5 cm.
Wrap it with bias tape and secure it with glue on the inside.
Now that the fields are ready, we put them (literally) on the bottle.
Decorate the hat with a narrow ribbon in a contrasting color.
Glue a rosette of the same color from ribbons.
Our bride is ready!
For work we will need:
- a bottle of champagne
- white bias tape 6-7 meters
- white satin ribbon 5 cm wide
- scissors
- glue
- needle
- thread
- beads and artificial pearls
- ribbon rose
- narrow ribbon in rose color
- any plastic bottle
- rhinestones
We clean the bottle from the label. To do this, it is advisable to place it in a bucket of cold water and leave it overnight. If the champagne is of high quality, the label will come off without any problems in the morning. If you decide to remove the label under running water, do not use warm water. So, the bottle is cleaned, you can start!
We'll start by gradually covering the bottle with pieces of white bias tape. Let's start working from the neck. We measure out a piece sufficient to fit around the neck and glue it to the bottle. I use Moment glue, you can use a silicone gun if that's more convenient for you.
We repeat this procedure. We measure, cut and glue.
The bottom layer should slightly overlap the top layer.At this stage the glue is visible, but when it is completely dry it will not be visible.
The bottom of the bottle will be hidden under the skirt, i.e. it won't be visible. But I still decided to cover it with white wide tape so that the green bottom of the bottle wouldn’t show through from under the skirt.
And now you can finish the work with the bias tape by sealing the bottle to the white tape.
You can see in the photo that I made the last rows of bias tape slightly shortened. This will not be visible in finished form. At this stage, the main thing is to make a beautiful back for our bride.
Let's move on to the skirt. We take a white ribbon 5 cm wide and begin to string it onto a thread, forming soft waves.
Having obtained the required length of the tape, cut it, connect the edges and glue it to the bottle. This will be the bottom layer of our skirt.
We do the same for the second layer. Glue the second layer a few centimeters higher than the first.
Glue the third and last layer of the skirt in the same way. I think this will be enough. You can add as many layers as you like. In order to hide the not very beautiful top of the tape gathered on a thread, we glue one layer of bias tape on top of the seam, so the product will look neater.
We glue a contrasting narrow ribbon on top of the bias tape.
On the front side we will make a loop from a ribbon of the same contrasting color and glue it to our dress, as shown in the photo.
To give it a more finished look, glue on a white rose. This is how we decorated the dress.
Let's continue decor. To imitate buttons, I glue rhinestones at the junction of the layers of bias tape.
Well, that's it, the bride has been dressed, now she needs to be decorated with jewelry. To do this, we will make beads for her. I strung artificial pearls on a thread and alternated them with silver beads.
I tied it directly on the bottle, carefully cutting the ends of the thread.Let's start decorating the head. We will have a wide-brimmed hat on our head. To begin, we cover the neck of the bottle with short pieces of white bias tape. This will be the tip of our hat.
To hide the unevenness, glue one layer of bias tape to the neck, as shown in the photo.
Now we cut out the brim of the hat from any plastic bottle. The inner circle is equal to the diameter of the bottle neck + 2 or 3 mm. And the outer circle will depend on how wide the brim of the hat is. My margins are about 1.5 cm.
Wrap it with bias tape and secure it with glue on the inside.
Now that the fields are ready, we put them (literally) on the bottle.
Decorate the hat with a narrow ribbon in a contrasting color.
Glue a rosette of the same color from ribbons.
Our bride is ready!
Similar master classes
Particularly interesting
Comments (0)
