Eggshell glass bottle decoration.
Instead of throwing away an empty bottle, you can use it to decorate your interior or present.
Materials for work:
1. Bottle.
2. Acetone.
3. Vata.
4. A piece of sponge.
5. Acrylic paint (white matte).
6. Napkin for decoupage with roses.
7. PVA glue.
8. Fan synthetic brush.
9. Acrylic paints in green and red colors.
10. Nail painting brush No. 0.
11. Glossy varnish.
12. Eggshells.
13. Natural brush No. 5.
Stages of decorating a bottle using the "decoupage".
1. An empty bottle must be cleared of labels. Then use acetone to degrease the glass.
2. The next step is priming the surface. To do this, dip a piece of sponge into white acrylic paint and cover the entire bottle, with the exception of the bottom, using dotted movements. The bottom is covered last, after the main surface has dried.
3. After some time, apply another layer of paint.
4. Let's start "decoupage".
5. You need to select the desired pattern on the napkin. For a small bottle, 2 identical oblong-shaped roses are suitable.
6. It is necessary to separate 2 layers from the napkin. To work, just use the top layer with the image.
7. First apply one rose to the center of the bottle. Using a fan brush dipped in PVA glue, glue the napkin to the surface. Apply glue from the center of the napkin to the edge.
8. In the same way, glue the napkin to the other side of the bottle.
9. The glue must dry well.
10. Then you should give the surface a shade.
11. At this stage, mix white and red colors until you get a pink tint. Using a sponge, paint the bottle.
To give the product volume and a crackling effect, it is necessary to decorate the bottle with eggshells. Surface decoration using eggshells.
1. The shell must be washed and removed from the film. Then dry and break into pieces of different sizes.
2. Apply glue to the surface around the rose.
3. Place a piece of shell on the place where the glue is applied. Then press well with your finger so that the shell is securely fixed in place.
4. Glue the shell pieces in different orders, choosing different sizes of pieces. Voids will form between the shells.
5. Glue the shell to the neck of the bottle.
6. The glue should dry well and the shell should fit tightly to the surface.
7. Give the shell a pink tone.
8. Then you need to paint the cracks. To do this, use a thin brush and light green paint to paint the voids between the shells.
9. Leave the product to dry.
The completion of the work will be varnishing the surface. Using a fan brush and varnish, cover the surface of the bottle.
The product must dry. Then you need to varnish the bottom.
Cork decoration.
1. For convenience, install the bottle cap in the plastic water cap. Clean the cork with acetone.
2. Using a sponge dipped in white paint, cover the cork once.
3. After a while, coat the cork with paint again.
4. Give the cork a pink tint.
5. Varnish the cork.
Bottle decoration. To give the bottle an elegant and sophisticated look, decorate the neck. To do this you will need scissors, a green ribbon, 2 pink beads and 2 green beads.
1. Cut the edge of the tape at an angle.
2. We put first a pink and then a green bead on the ribbon.
3. We tie 2 knots at the tip.
4. We do the same with the second edge of the tape.
5. Tie a ribbon around the neck of the bottle.
A bottle decorated in this way will bring a lot of pleasure during its making and will bring joy to others.
Materials for work:
1. Bottle.
2. Acetone.
3. Vata.
4. A piece of sponge.
5. Acrylic paint (white matte).
6. Napkin for decoupage with roses.
7. PVA glue.
8. Fan synthetic brush.
9. Acrylic paints in green and red colors.
10. Nail painting brush No. 0.
11. Glossy varnish.
12. Eggshells.
13. Natural brush No. 5.
Stages of decorating a bottle using the "decoupage".
1. An empty bottle must be cleared of labels. Then use acetone to degrease the glass.
2. The next step is priming the surface. To do this, dip a piece of sponge into white acrylic paint and cover the entire bottle, with the exception of the bottom, using dotted movements. The bottom is covered last, after the main surface has dried.
3. After some time, apply another layer of paint.
4. Let's start "decoupage".
5. You need to select the desired pattern on the napkin. For a small bottle, 2 identical oblong-shaped roses are suitable.
6. It is necessary to separate 2 layers from the napkin. To work, just use the top layer with the image.
7. First apply one rose to the center of the bottle. Using a fan brush dipped in PVA glue, glue the napkin to the surface. Apply glue from the center of the napkin to the edge.
8. In the same way, glue the napkin to the other side of the bottle.
9. The glue must dry well.
10. Then you should give the surface a shade.
11. At this stage, mix white and red colors until you get a pink tint. Using a sponge, paint the bottle.
To give the product volume and a crackling effect, it is necessary to decorate the bottle with eggshells. Surface decoration using eggshells.
1. The shell must be washed and removed from the film. Then dry and break into pieces of different sizes.
2. Apply glue to the surface around the rose.
3. Place a piece of shell on the place where the glue is applied. Then press well with your finger so that the shell is securely fixed in place.
4. Glue the shell pieces in different orders, choosing different sizes of pieces. Voids will form between the shells.
5. Glue the shell to the neck of the bottle.
6. The glue should dry well and the shell should fit tightly to the surface.
7. Give the shell a pink tone.
8. Then you need to paint the cracks. To do this, use a thin brush and light green paint to paint the voids between the shells.
9. Leave the product to dry.
The completion of the work will be varnishing the surface. Using a fan brush and varnish, cover the surface of the bottle.
The product must dry. Then you need to varnish the bottom.
Cork decoration.
1. For convenience, install the bottle cap in the plastic water cap. Clean the cork with acetone.
2. Using a sponge dipped in white paint, cover the cork once.
3. After a while, coat the cork with paint again.
4. Give the cork a pink tint.
5. Varnish the cork.
Bottle decoration. To give the bottle an elegant and sophisticated look, decorate the neck. To do this you will need scissors, a green ribbon, 2 pink beads and 2 green beads.
1. Cut the edge of the tape at an angle.
2. We put first a pink and then a green bead on the ribbon.
3. We tie 2 knots at the tip.
4. We do the same with the second edge of the tape.
5. Tie a ribbon around the neck of the bottle.
A bottle decorated in this way will bring a lot of pleasure during its making and will bring joy to others.
Similar master classes
Particularly interesting
Comments (1)
