Soap "Bright stripes"
Making handmade soaps has now become a hobby for many people around the world. If you haven’t tried making soap yourself, be sure to make at least a couple of pieces of this fragrant soap. You will be satisfied yourself and please your loved ones. To make homemade soap you will need the following components:
Transparent and white soap base. Red and yellow dyes. Dyes must be those that do not migrate in the finished soap. Cosmetic fragrance for your taste, here - Duchess. Additionally, you need to take care of the alcohol. This is the only ingredient that cannot be purchased in soap making stores. Regular vodka will do instead, but you need to pour it into a spray bottle for easy spraying. Of the tools needed for soap making, use the following:
Silicone forms. These can be either special molds for soap making or regular baking molds. Knife and board for cutting soap base. Plastic glasses. It is easier to wash off the soap base from them than from glass ones. But disposable cups will not work, as they will not withstand the high temperature of the molten base. Plastic or wooden sticks.In order to melt the base, you need a microwave oven. You need to set it to medium or minimum power. At maximum power, the base will melt unevenly. In two glasses, cut approximately equal amounts of clear and white soap base into cubes.
The first thing you need to do in the microwave is a glass with a transparent base. You need to melt the base gradually, that is, every 30-35 seconds you need to take the glass out of the microwave and check the condition of the base. Under no circumstances should you bring it to a boil, otherwise the soap will lose its caring properties. When the base melts and becomes liquid and homogeneous, add red dye and fragrance to it and mix.
Pour part of the base into molds in a thin layer and leave it to cool. Make sure the previous layer is completely cured before pouring the next layer. When you are sure that the red base has set, melt the white base, add the yellow dye and fragrance to it and stir.
Sprinkle the red transparent layer thoroughly with alcohol and immediately fill it with a small amount of the yellow base.
The thickness of the layer should be what you want to see stripes on the soap. Repeat the procedure again, pouring the red base, yellow on top and red again.
The top layer can be anything - at your discretion. When the last layer of soap has dried, it can be removed. It is very easy to remove products from silicone molds. Beautiful and fragrant soap is ready!
Transparent and white soap base. Red and yellow dyes. Dyes must be those that do not migrate in the finished soap. Cosmetic fragrance for your taste, here - Duchess. Additionally, you need to take care of the alcohol. This is the only ingredient that cannot be purchased in soap making stores. Regular vodka will do instead, but you need to pour it into a spray bottle for easy spraying. Of the tools needed for soap making, use the following:
Silicone forms. These can be either special molds for soap making or regular baking molds. Knife and board for cutting soap base. Plastic glasses. It is easier to wash off the soap base from them than from glass ones. But disposable cups will not work, as they will not withstand the high temperature of the molten base. Plastic or wooden sticks.In order to melt the base, you need a microwave oven. You need to set it to medium or minimum power. At maximum power, the base will melt unevenly. In two glasses, cut approximately equal amounts of clear and white soap base into cubes.
The first thing you need to do in the microwave is a glass with a transparent base. You need to melt the base gradually, that is, every 30-35 seconds you need to take the glass out of the microwave and check the condition of the base. Under no circumstances should you bring it to a boil, otherwise the soap will lose its caring properties. When the base melts and becomes liquid and homogeneous, add red dye and fragrance to it and mix.
Pour part of the base into molds in a thin layer and leave it to cool. Make sure the previous layer is completely cured before pouring the next layer. When you are sure that the red base has set, melt the white base, add the yellow dye and fragrance to it and stir.
Sprinkle the red transparent layer thoroughly with alcohol and immediately fill it with a small amount of the yellow base.
The thickness of the layer should be what you want to see stripes on the soap. Repeat the procedure again, pouring the red base, yellow on top and red again.
The top layer can be anything - at your discretion. When the last layer of soap has dried, it can be removed. It is very easy to remove products from silicone molds. Beautiful and fragrant soap is ready!
Similar master classes
Particularly interesting
Comments (0)
