Simple antenna for digital television


The antenna is designed to receive digital television channels in the DVB-T2 range. It has a very simple design and repeatability. Can be used as a home or outdoor antenna. Good for long-distance reception.

Will need


Materials:
  • Single-core copper wire 3 mm in diameter.
  • TV cable with plug.
  • Round plastic for the base.

Tool:
  • Soldering iron with solder and flux.
  • Hot glue gun.
  • Wire cutters.
  • Pliers.
  • Roulette or ruler.

Manufacturing an antenna for DVB-T2 digital television


The antenna drawing looks like this:

This is one of the most popular types - double biquadrat, also called Kharchenko antenna. It is tuned to the middle of the DVB-T2 range.
To make it, you can use wire with a larger diameter than 3 mm.
We take a tape measure and measure the sides for bending according to the drawing.

Use pliers to make bends to form a square.

We make two such squares for both arms of the antenna. It is not at all necessary to make loops at the ends, but with them it is easier to solder the squares together.
Now we wet the joints with flux.

We solder both squares into one.

Solder the cable.

We place it on a plastic round and pour hot glue into the feeding areas, while simultaneously gluing the antenna to the plastic.

The antenna is ready. It can be hung by this round piece of plastic.

The antenna works great at home and outdoors. Quite suitable for long-distance reception in the country. As you can see, the design is extremely simple, which gives it significant advantages.
Now we send it to the transmission station and start an automatic search.
You can also modify the design with a reflector by cutting it out of a piece of tin.
I would also like to draw your attention to maintaining the dimensions during manufacturing, since a slight deviation from the specified ones can significantly reduce the quality of reception of digital channels.
If you will use the antenna outdoors, it would be a good idea to paint it to protect it from weather conditions. Although, it seems to me, nothing will happen to her anyway.

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (9)
  1. Hello
    #1 Hello Guests June 6, 2018 05:11
    0
    Yes. This antenna works well.I would like to clarify - perhaps the television cable needs to be laid on two sides of one of the squares, this will play the role of a matching transformer.
  2. Dmitriy
    #2 Dmitriy Guests 6 June 2018 20:40
    0
    from two tin cans, much simpler and faster
    1. Anode
      #3 Anode Guests 2 May 2019 16:44
      1
      They steamed it with their banks*
  3. VK
    #4 VK Guests 7 June 2018 15:31
    3
    it is also called the Kharchenko antenna

    Yes, this is a Kharchenko antenna.
    But sorry in a completely perverted way.
    In this design, it is simply a quarter-wave dipole, which is absolutely not matched with the reduction cable.

    To become a Kharchenko antenna, it must be rotated 90 degrees and the reduction cable must be laid on two sides of one of the squares (lower part) where the zero point of the antenna is located (at this point you can ground it if the antenna is external).
    The zero point disconnects the reduction cable from parasitic signal reception.
  4. Ibrahim
    #5 Ibrahim Guests 12 June 2018 09:32
    1
    Even easier
    1. Anode
      #6 Anode Guests 2 May 2019 16:48
      0
      Yes, MatchTV catches any nail laughing
  5. Calle
    #7 Calle Guests 12 June 2018 21:09
    0
    This is not an antenna, but it will catch something like any wire.
  6. Guest Nikolay
    #8 Guest Nikolay Guests June 14, 2018 00:13
    2
    An excellent antenna was made from a piece of metal-plastic water pipe with a diameter of 20 mm and a length of 66 cm. In the middle of the pipe, a strip of aluminum foil (5 mm ring) was removed along the circumference. It turned out like two pipes connected by an internal plastic pipe (half-wave vibrator), and the TV cable terminals were attached to them with self-tapping screws (without any coordination). Perfectly catches TWO packages (20 channels) of digital television.
  7. Guest Alexander
    #9 Guest Alexander Guests 14 December 2018 15:44
    1
    I’m not an expert, but having calculated the sides of the square using the frequency of my region 482 MHz, this antenna didn’t pick up anything, why