DIY corrugated paper Christmas tree
It is very easy to make such a Christmas tree; you do not need any special devices or tools. Thanks to the chosen white color, the result was a charming snow-covered Christmas tree. But if you have a desire, you can do it in the standard green color. The texture of corrugated paper and the large number of branches make it spectacular in any color.
1. We will need the following materials and tools:
• White corrugated paper.
• Double-sided tape.
• Scissors.
• A piece of thick paper. (Wallpaper in this master class)
2. We make a cone like this from a piece of wallpaper. Don't try to fasten it tightly. In the future, it will still be wrapped in several layers of tape. Which will give strength and hardness to the base.
3. Cut the corrugated paper as follows. We will need 3 different sizes of blanks. Since every 2-3 rows the size of the spruce branches should decrease.
4. Twist the rectangle.
5. Fold in half.
6. Lightly press the fold with your finger. So that the workpiece takes on a convex shape.
7.Apply double-sided tape to the cone.
8. We begin to glue our blanks one by one.
9. This is what the first row of tree branches looks like.
10. Next, glue the second piece of tape. We do it as follows. We go a little onto the blanks of the previous row to secure them.
11. We glue the second and all subsequent rows according to the following principle. Each piece must fall between the pieces of the previous row. So that the branches of the spruce look natural, and there are no empty spaces between them.
12. We do the top like this. We take a small piece, already twisted, and cut it at an angle. Glue it directly on top of the tree. So that one part covers one side, and the other the other.
13. So the wonderful Christmas tree is ready.
1. We will need the following materials and tools:
• White corrugated paper.
• Double-sided tape.
• Scissors.
• A piece of thick paper. (Wallpaper in this master class)
2. We make a cone like this from a piece of wallpaper. Don't try to fasten it tightly. In the future, it will still be wrapped in several layers of tape. Which will give strength and hardness to the base.
3. Cut the corrugated paper as follows. We will need 3 different sizes of blanks. Since every 2-3 rows the size of the spruce branches should decrease.
4. Twist the rectangle.
5. Fold in half.
6. Lightly press the fold with your finger. So that the workpiece takes on a convex shape.
7.Apply double-sided tape to the cone.
8. We begin to glue our blanks one by one.
9. This is what the first row of tree branches looks like.
10. Next, glue the second piece of tape. We do it as follows. We go a little onto the blanks of the previous row to secure them.
11. We glue the second and all subsequent rows according to the following principle. Each piece must fall between the pieces of the previous row. So that the branches of the spruce look natural, and there are no empty spaces between them.
12. We do the top like this. We take a small piece, already twisted, and cut it at an angle. Glue it directly on top of the tree. So that one part covers one side, and the other the other.
13. So the wonderful Christmas tree is ready.
Similar master classes
Particularly interesting
Comments (0)
