How to make a device for a drill for drilling holes in tiles of any diameter

Diamond tile bits for drilling holes for socket boxes, pipes and ventilation are expensive. If you lay tiles for yourself and no longer plan to do so, purchasing them will not be advisable. In this case, make this attachment on an angle grinder, and you will be able to drill a hole of almost any diameter.

Materials:

Strip 20 mm;
pipe 40-50 mm;
tile drill 6-10 mm;
stud M6-M8;
nuts M6-M8 – 2 pcs.

High-quality drills on AliExpress at a discount - http://alii.pub/5zwmxz

The manufacturing process of a universal drill

To drill holes of any size in ceramic tiles, you can make an attachment for a drill that works on the principle of a ballerina drill and a compass. To do this, you need to cut a longitudinal cut in a strip of metal 20 cm long:

Cut off the strip.

We drill holes and connect them.

This blank is welded to a pipe ring with a diameter of 40-50 mm.The internal cross-section of the latter is selected to match the mounting diameter of the protective casing on an existing angle grinder or drill.

You need to make a centering pin from a 10 cm long pin by sharpening it.

Then it is screwed into the cut of the strip with two nuts.

To use the device, you need to install a drill chuck with a tile drill on the spindle of an angle grinder without a casing. You can see how to install a cartridge on an angle grinder here - https://home.washerhouse.com/en/5306-kak-ustanovit-sverlilnyj-patron-na-bolgarku-i-zachem-jeto-mozhet-prigoditsja.html Or use a regular drill.

Then it is inserted into the attachment ring. As a result, we get a drilling device that allows you to mill a hole in a circle in a tile. To do this, you need to first mark its center in place.