Egg pendant
Easter - not only a holiday on which it is customary to gather around the family table, but also another reason to make your family and friends original present. And what could be more pleasant than receiving gifts made with your own hands?
A bright and original gift that will decorate any interior will be an egg-shaped pendant made of wire and beads. To make it, prepare silver wire 0.3 mm and 1 mm thick, multi-colored beads, and pliers.
Take a piece of thick (1mm) wire 16 cm long. Twist the ends of the wire together and give the product an egg shape.
Take a thin (0.3 mm) wire and cut a piece 1 meter long. Fold it in half in the middle and twist it slightly. This wire will be needed to form dense but flexible bases intended for further braiding. Secure one end of the wire by twisting it three times in the middle of the egg. Next, stretch the wire to the opposite side and also secure with twisting. Then fasten the wire again on the opposite side, thereby forming parallel lines.
Place orange beads on a thin wire and secure the bead thread by twisting it around the wire base.
At this stage, it is important to monitor the tension of the wire in order to avoid deformation of the egg. After filling the first tier, cut the wire and secure it by wrapping it around the frame.
Fill the second tier with yellow and blue beads.
The third (middle) tier will be filled not with vertical, but with horizontal rows. To form it, secure the wire in a wavy manner. And fill each sector one by one, securing the working thread in the same way as in the previous stages.
Having filled all sectors of the middle tier, form vertical rows of yellow, blue and purple beads on the remaining rows. Decorate the top of the pendant with a golden bow.
Easter pendant made of wire and beads in pop-art style is ready.
A bright and original gift that will decorate any interior will be an egg-shaped pendant made of wire and beads. To make it, prepare silver wire 0.3 mm and 1 mm thick, multi-colored beads, and pliers.
Take a piece of thick (1mm) wire 16 cm long. Twist the ends of the wire together and give the product an egg shape.
Take a thin (0.3 mm) wire and cut a piece 1 meter long. Fold it in half in the middle and twist it slightly. This wire will be needed to form dense but flexible bases intended for further braiding. Secure one end of the wire by twisting it three times in the middle of the egg. Next, stretch the wire to the opposite side and also secure with twisting. Then fasten the wire again on the opposite side, thereby forming parallel lines.
Place orange beads on a thin wire and secure the bead thread by twisting it around the wire base.
At this stage, it is important to monitor the tension of the wire in order to avoid deformation of the egg. After filling the first tier, cut the wire and secure it by wrapping it around the frame.
Fill the second tier with yellow and blue beads.
The third (middle) tier will be filled not with vertical, but with horizontal rows. To form it, secure the wire in a wavy manner. And fill each sector one by one, securing the working thread in the same way as in the previous stages.
Having filled all sectors of the middle tier, form vertical rows of yellow, blue and purple beads on the remaining rows. Decorate the top of the pendant with a golden bow.
Easter pendant made of wire and beads in pop-art style is ready.
Similar master classes
Particularly interesting
Comments (0)
