Decorating a phone case with autumn leaves and dried flowers
Surely there is no fashionista who would not dream of getting a unique thing that has no analogues.
Today, original cases for mobile devices can be purchased at any store, but such exclusive models are by no means cheap. However, you can try to decorate an accessory for your phone yourself using various natural materials.
In order to make an original case design, you will need:
1.First of all, you need to degrease the case and clean it with acetone (or nail polish remover).
2. Arrange leaves and dried flowers on the cover as you like. Remember that the flowers should not be too voluminous, otherwise nothing will work out. It is advisable that the application be no thicker than 2 mm.
3.Use glue to attach all the flowers and leaves. The main thing is that they do not extend beyond the surface of the case.
4.Take epoxy resin and hardener.Dilute them in the required proportions and heat them in a water bath, stirring thoroughly.
5. Place cellophane under the cover so as not to stain the work surface. Fill it with the resulting glue. Start the procedure from the middle of the case, allowing the epoxy to spread over its entire surface.
6.Allow your new case to dry thoroughly.
After completing all the work, you will be absolutely sure that only you will have such a stylish and unusual accessory for your phone.
Today, original cases for mobile devices can be purchased at any store, but such exclusive models are by no means cheap. However, you can try to decorate an accessory for your phone yourself using various natural materials.
In order to make an original case design, you will need:
- mobile phone case,
- leaves and dried flowers,
- Super glue,
- epoxy adhesive,
- acetone,
- cotton pads,
- disposable cup and spoon.
1.First of all, you need to degrease the case and clean it with acetone (or nail polish remover).
2. Arrange leaves and dried flowers on the cover as you like. Remember that the flowers should not be too voluminous, otherwise nothing will work out. It is advisable that the application be no thicker than 2 mm.
3.Use glue to attach all the flowers and leaves. The main thing is that they do not extend beyond the surface of the case.
4.Take epoxy resin and hardener.Dilute them in the required proportions and heat them in a water bath, stirring thoroughly.
5. Place cellophane under the cover so as not to stain the work surface. Fill it with the resulting glue. Start the procedure from the middle of the case, allowing the epoxy to spread over its entire surface.
6.Allow your new case to dry thoroughly.
After completing all the work, you will be absolutely sure that only you will have such a stylish and unusual accessory for your phone.
Similar master classes
Particularly interesting
Comments (0)
