Hiding wires under a computer desk
Under the table on which a personal computer stands there is almost always a large number of wires connecting peripheral devices. This is very inconvenient and ugly, and often interferes with normal work.
I'll show you an easy way to organize under the desk behind your computer. You don't have to make any complex or simple devices.
To properly distribute everything, you will need just a few large paper clips, which you can easily buy at your nearest office supply store.
The idea is to secure the wires under the table on the back of the tabletop. You can also attach small devices there: monitor power supply, various switches, modems, surge protectors, carriers...
Total what you need to buy to clean up under the table:
First of all, let's secure the power equipment.
To find out where to screw in the screws, take a piece of paper. Let's attach it to the mounting side of the device.And just like in elementary school, we’ll do shading with pressure to make the outline clearer.
Then we apply this piece of paper to the table and screw in the screw. We tear the leaf, thereby removing it.
Next, attach the clamps with self-tapping screws. We distribute the wires among these clamps. It is advisable to disconnect all wires before connecting - it will be easier to distribute.
One or two and order is evident. If necessary, secure individual units with plastic ties.
Just like that, in a few simple steps we created excellent order. Now you can stretch your legs without fear and nothing will interfere with them.
I'll show you an easy way to organize under the desk behind your computer. You don't have to make any complex or simple devices.
To properly distribute everything, you will need just a few large paper clips, which you can easily buy at your nearest office supply store.
Idea
The idea is to secure the wires under the table on the back of the tabletop. You can also attach small devices there: monitor power supply, various switches, modems, surge protectors, carriers...
Total what you need to buy to clean up under the table:
- - Large paper clips.
- - Short wood screws.
- - Washers.
- - Plastic ties (optional).
Let's get started
First of all, let's secure the power equipment.
To find out where to screw in the screws, take a piece of paper. Let's attach it to the mounting side of the device.And just like in elementary school, we’ll do shading with pressure to make the outline clearer.
Then we apply this piece of paper to the table and screw in the screw. We tear the leaf, thereby removing it.
Next, attach the clamps with self-tapping screws. We distribute the wires among these clamps. It is advisable to disconnect all wires before connecting - it will be easier to distribute.
One or two and order is evident. If necessary, secure individual units with plastic ties.
Just like that, in a few simple steps we created excellent order. Now you can stretch your legs without fear and nothing will interfere with them.
Similar master classes
Particularly interesting
Comments (0)
