DIY pleated blinds
Among the many advantages of decorating a window with pleated paper curtains, it is worth noting the unlimited color range, ease of manufacture, environmental friendliness, affordability, stylish appearance and versatility, since they are suitable for any interior. In addition, when attaching such blinds you do not have to drill into the frame. This is a real find for a rented apartment, windows of non-standard shape, as well as for those who like to change their design frequently. Considering that they are attached directly to the window opening, the window sill remains open, which is very convenient in the kitchen and nursery. They are also indispensable in a glazed loggia, as they allow you to ennoble the space, saving money. Pleated fabrics look beautiful both alone and in combination with traditional curtains or tulle.
The disadvantages of this design are that it cannot be washed, and if the paper becomes wrinkled during use, it will be impossible to restore its original shape. However, this disadvantage is compensated by the low cost of the product. Whatman paper is also suitable for the role of blinds, which can be painted in any color if desired or images can be created on it.
Materials for work:
- 1. Wallpaper;
- 2. Thin satin ribbon;
- 3. Drawstring;
- 4. End switch;
- 5. Hole puncher or drill;
- 6.Double-sided tape;
- 7. Ruler, pencil, scissors.
Sequence of manufacturing pleated blinds
The main thing in the manufacture of blinds attached to the window sash is to correctly calculate the size of the canvas. In order not only to shade the room from the sun, but also to hide the interior from prying eyes, the pleated panels should be approximately 2 cm wider than the glass on each side. The length of the wallpaper should be one and a half times the height of the window.
Having cut off the required volume of fabric, we proceed to the most important part - folding the accordion. The width of the so-called slats should not exceed 4 cm, otherwise the curtains will not look aesthetically pleasing. Using a pencil on the wrong side, mark the places of future folds.
Using a ruler, make folds.
Using a hole punch, awl or drill, make a hole exactly in the middle of the workpiece.
We stretch a satin ribbon through it and tie a knot on top. Instead, you can use a silk cord, but the advantage of the tape is that it is easier to match the color of the wallpaper.
At the bottom we insert a drawstring that will adjust the height of the pleated.
Now you need to connect the edges of the bottom fold. This can be done using glue, magnets or double-sided tape. Apply glue without reaching the middle, and then connect both ends, forming a peacock tail. For better adhesion, we put paper clips or simple paper clips on the fold and hold it until the glue dries.
A wooden end cap is used as a weighting material.
We glue double-sided tape over the entire width to the top edge.
We remove the protective layer from the double-sided tape, glue the top fold onto the frame and adjust the height of the curtain, moving the drawstring to the desired level.
DIY wallpaper pleated blinds are ready!
