Mug stand
Original coasters for a mug can be made very quickly. Such a thing will decorate your own interior, and can also be an original gift.
You will need:
1. Unneeded CD.
2. Red gouache.
3. Transparent self-adhesive film.
4. A sheet of paper.
5. Scissors, compass, pencil, brush, glue stick.
6. Black and white printer.
Stages of work.
1. Using a brush, apply gouache to the edge of the disc.
Leave until the paint is completely dry. If you apply a thick layer, it may take an hour to dry. If you don't give the paint a chance to dry completely, it will smear when you apply the glue.
2. While the paint is drying, print a black and white picture or photograph on the printer. You can also find cute images on the Internet. We chose the image of Big Ben.
If the image allows, then you can paint several accents on the picture (for example, highlight a flower, a girl’s lips, a handbag, etc. in red). Instead of such printed pictures, you can use photographs or magazine clippings.
3. Attach the CD to the picture and circle it.Using a compass, reduce the circumference by reducing the radius by 5 mm. Cut it out.
4. Glue the picture to the CD using a glue stick. The glue can be applied to both paper and disk. Make sure the edges of the picture are firmly attached to the disc.
5. Now you need to protect the stand from moisture and dirt. To do this, remove the protective layer from the self-adhesive film and place the disc with the picture on the sticky part.
Do everything very carefully: you won’t be able to redo it. If the film bubbles, try smoothing it out.
6. Cut the film so that its edge extends slightly onto the back of the disc. The stand is ready.
You will need:
1. Unneeded CD.
2. Red gouache.
3. Transparent self-adhesive film.
4. A sheet of paper.
5. Scissors, compass, pencil, brush, glue stick.
6. Black and white printer.
Stages of work.
1. Using a brush, apply gouache to the edge of the disc.
Leave until the paint is completely dry. If you apply a thick layer, it may take an hour to dry. If you don't give the paint a chance to dry completely, it will smear when you apply the glue.
2. While the paint is drying, print a black and white picture or photograph on the printer. You can also find cute images on the Internet. We chose the image of Big Ben.
If the image allows, then you can paint several accents on the picture (for example, highlight a flower, a girl’s lips, a handbag, etc. in red). Instead of such printed pictures, you can use photographs or magazine clippings.
3. Attach the CD to the picture and circle it.Using a compass, reduce the circumference by reducing the radius by 5 mm. Cut it out.
4. Glue the picture to the CD using a glue stick. The glue can be applied to both paper and disk. Make sure the edges of the picture are firmly attached to the disc.
5. Now you need to protect the stand from moisture and dirt. To do this, remove the protective layer from the self-adhesive film and place the disc with the picture on the sticky part.
Do everything very carefully: you won’t be able to redo it. If the film bubbles, try smoothing it out.
6. Cut the film so that its edge extends slightly onto the back of the disc. The stand is ready.
Similar master classes
Particularly interesting
Comments (0)
