Health children's town
After the construction of a private house, there were scraps of metal pipes, profiles and boards left. This material was used for the installation of a recreational town with sports equipment, a sandbox and swings. Based on the prepared sketch of the town, taking into account the available material, we begin work.
For work you will need the following materials: a pipe with a diameter of 57 millimeters - 35 meters, an angle of 35/35 millimeters - 45 meters, a pipe with a diameter of 15 (20) millimeters - 10 meters, corrugated roofing sheet 7 square meters, polycarbonate 7.5 square meters (about 2/ 3 sheets), 0.2 liters of paint in several colors, 2 boards 50 millimeters thick, 0.2 wide and 1.5 meters long, 100 roofing screws, 50 rivets. You can use other materials depending on what you have left from construction.
We begin marking and installing the pipe racks of the future “fungus”, for which we will prepare the appropriate holes in the ground for pouring concrete. It is advisable to weld heels onto the pipes for stability. We bury the pipes half a meter, this design won’t require any more, the shells of the town will already be in a bundle. We fill the ends of the pipes with concrete, and level the top of the structure.From the bottom of the sandbox and a little higher, along the height of the sand box about 0.3 meters, scald with a corner, we get a box-shaped shape. We cut out blanks from the profile sheet and insert them into the corners from the inside of the sandbox, fasten the sheets through the drilled holes to the corner with rivets.
Next, the rafter system of a conventional gable roof is welded from a corrugated pipe or corner, and the sheets of metal roof tiles (profiles) are attached to roofing screws.
To protect from sunlight and strong winds, we use cellular polycarbonate and attach the side walls to the “mushroom” posts of the sandbox with self-tapping screws. Scraps of colored polycarbonate are well suited for gable cladding.
For convenience, the edges of the sandbox will need to be edged with a well-planed board coated with a protective liquid; it is better to fasten it to the corner with bolts or self-tapping screws.
To make a horizontal bar, ladder and swing, you will need a three-quarter or half-inch pipe. We cut the workpieces and weld them in a circle to the pipe racks, clean the seams and scale using the grinding wheel of an angle grinder, then polish the metal structure with emery cloth and prepare it for painting. It is better to paint the children's playground in bright and colorful colors.
For boxing, a holder is made for a special punching bag, which is attached with a carabiner.
We fill the sandbox with light sand, attach a swing and a punching bag.
The result is a wonderful universal town with sports equipment and a sandbox for children of different ages.
For work you will need the following materials: a pipe with a diameter of 57 millimeters - 35 meters, an angle of 35/35 millimeters - 45 meters, a pipe with a diameter of 15 (20) millimeters - 10 meters, corrugated roofing sheet 7 square meters, polycarbonate 7.5 square meters (about 2/ 3 sheets), 0.2 liters of paint in several colors, 2 boards 50 millimeters thick, 0.2 wide and 1.5 meters long, 100 roofing screws, 50 rivets. You can use other materials depending on what you have left from construction.
We begin marking and installing the pipe racks of the future “fungus”, for which we will prepare the appropriate holes in the ground for pouring concrete. It is advisable to weld heels onto the pipes for stability. We bury the pipes half a meter, this design won’t require any more, the shells of the town will already be in a bundle. We fill the ends of the pipes with concrete, and level the top of the structure.From the bottom of the sandbox and a little higher, along the height of the sand box about 0.3 meters, scald with a corner, we get a box-shaped shape. We cut out blanks from the profile sheet and insert them into the corners from the inside of the sandbox, fasten the sheets through the drilled holes to the corner with rivets.
Next, the rafter system of a conventional gable roof is welded from a corrugated pipe or corner, and the sheets of metal roof tiles (profiles) are attached to roofing screws.
To protect from sunlight and strong winds, we use cellular polycarbonate and attach the side walls to the “mushroom” posts of the sandbox with self-tapping screws. Scraps of colored polycarbonate are well suited for gable cladding.
For convenience, the edges of the sandbox will need to be edged with a well-planed board coated with a protective liquid; it is better to fasten it to the corner with bolts or self-tapping screws.
To make a horizontal bar, ladder and swing, you will need a three-quarter or half-inch pipe. We cut the workpieces and weld them in a circle to the pipe racks, clean the seams and scale using the grinding wheel of an angle grinder, then polish the metal structure with emery cloth and prepare it for painting. It is better to paint the children's playground in bright and colorful colors.
For boxing, a holder is made for a special punching bag, which is attached with a carabiner.
We fill the sandbox with light sand, attach a swing and a punching bag.
The result is a wonderful universal town with sports equipment and a sandbox for children of different ages.
Similar master classes
Particularly interesting
Comments (1)
