How to hang a picture without drilling, nails or screws

Is it possible to hang a picture on the wall of an apartment without using a drill, hammer drill and screws? There is such a method.

Were purchased at the store special fasteners. They are designed and produced specifically for hanging paintings, posters and other decorative elements on walls. The packaging states that they can withstand weights of up to 450 grams, do not damage coatings, and are easily removed without leaving marks. Let's check.

How to hang a picture without a punch and a nail

Upon closer inspection, they resemble the well-known Velcro. Double-sided tape is applied to both sides. And the first thing you should do is degrease the places where it is glued on the poster and on the wallpaper. Of course, we will mount the picture in the area of its corners. So we degrease here. You can treat a larger area on the wall.

Now, according to the instructions, you should connect the two halves Velcro. It says to squeeze until it clicks. Then remove the protective paper from one side of the tape and press it firmly in the place of gluing on the back surface of the poster. At each of the four corners. Please note that Velcro has peculiar tabs.Place them so that they are not visible from the edge of the picture. One such tongue was cut off with scissors after being glued incorrectly. This did not affect the strength.

The next step is to glue the picture to the wall. Here the standard suspension will interfere with us. Remove it using a screwdriver. Remove the protective paper from the other side of the tape.

Next, press the reproduction tightly against the wallpaper for 30 seconds, after which we tear it off the wall, separating it Velcro. Why is this being done? Ah, it’s unclear. We do it as it is written in the instructions.