Blue wisteria
Making something with your own hands is wonderful present for relatives. Beaded trees at home will never wither, do not require special care, they look great in the interior.
To create such a miracle, we will use Czech beads.
We will need:
White beads – 30 g;
Blue beads – 25 g;
Dark blue beads – 25 g;
Green beads (bugles) – 30 g;
Gray wire 0.03 – 1 coil;
Thick wire (25-30 in length) – 2 pcs;
Matches - 2 pcs;
Gypsum – 800 g;
Paint (brown) – 100 ml;
Thin wire (for fastening);
Wire of medium thickness;
Toothpicks;
Super glue;
Stones (large and small);
Glitter powder (blue);
Pot (I take a tray from a flower).
Well, let's begin our interesting work. To begin, select shades.
We cut off a thin wire about 70 centimeters long. We string 5 dark blue beads, lead them to the middle of the wire and twist them using the “loop method”.
We work with one side. We collect beads in this order: 27 dark blue beads, 4 blue, 4 blue, 10 blue, 1 blue, 19 blue, 5 white, 5 blue and 16 white.
Then we twist the loops in the following sequence: 6 blue, 8 blue, 9 blue, 3 blue 4 blue 3 blue, 1 blue 10 blue 1 blue, 14 blue, 5 blue 5 white 5 blue, 16 white.
And the same thing on the other side.
This is what we got.
Next, fold the wire in half and twist it.
We weave the leaves from glass beads using the French weaving method. There are 27 leaves in total, 9 for each tree.
This is what we got. There are approximately 12-13 branches per tree. We twist 3 branches into one.
We make a wire blank. Take 1 thick birch wire, bend it slightly at the top. We wrap the middle one around it and also leave a piece on top (these will be branches) and form the legs of the tree at the bottom. Now we take even thinner wire and make the 3rd branch the same way. The middle wire should be slightly higher than the other two. And there are three such blanks: 1 high, 1 medium, 1 low.
Next, take nine leaves and twist them three in one branch. We attach them to the top of the wire. Then we wrap 6-7 branches of blue wisteria on the two remaining wires.
And so three trees. Then we dilute the plaster with water until it becomes thick sour cream and add a little super glue. Pour gypsum into the pot. We insert three wisteria on top and lightly cover the bottom of the trunks with plaster. I also inserted 3 green bushes (for the aquarium). Let it dry overnight.
Then paint the trunks with plaster. Since there is a thin layer of plaster, it will dry in half a day.
We lay out a path from small pebbles. At the back we use glue to build a fence with large stones.
Sprinkle the path with blue sparkles.
Let's make a bench. Take 2 matches and cut off the heads. Glue 3 cut toothpicks on top of them. We make the legs from the halves of one match. Glue perpendicularly. We connect with glue.
Glue the seat of the bench on top of the legs using toothpicks.
We place the finished bench near the tree. Sprinkle the bottom with green beads. Look how beautiful you have turned out.
To create such a miracle, we will use Czech beads.
We will need:
White beads – 30 g;
Blue beads – 25 g;
Dark blue beads – 25 g;
Green beads (bugles) – 30 g;
Gray wire 0.03 – 1 coil;
Thick wire (25-30 in length) – 2 pcs;
Matches - 2 pcs;
Gypsum – 800 g;
Paint (brown) – 100 ml;
Thin wire (for fastening);
Wire of medium thickness;
Toothpicks;
Super glue;
Stones (large and small);
Glitter powder (blue);
Pot (I take a tray from a flower).
Well, let's begin our interesting work. To begin, select shades.
We cut off a thin wire about 70 centimeters long. We string 5 dark blue beads, lead them to the middle of the wire and twist them using the “loop method”.
We work with one side. We collect beads in this order: 27 dark blue beads, 4 blue, 4 blue, 10 blue, 1 blue, 19 blue, 5 white, 5 blue and 16 white.
Then we twist the loops in the following sequence: 6 blue, 8 blue, 9 blue, 3 blue 4 blue 3 blue, 1 blue 10 blue 1 blue, 14 blue, 5 blue 5 white 5 blue, 16 white.
And the same thing on the other side.
This is what we got.
Next, fold the wire in half and twist it.
We weave the leaves from glass beads using the French weaving method. There are 27 leaves in total, 9 for each tree.
This is what we got. There are approximately 12-13 branches per tree. We twist 3 branches into one.
We make a wire blank. Take 1 thick birch wire, bend it slightly at the top. We wrap the middle one around it and also leave a piece on top (these will be branches) and form the legs of the tree at the bottom. Now we take even thinner wire and make the 3rd branch the same way. The middle wire should be slightly higher than the other two. And there are three such blanks: 1 high, 1 medium, 1 low.
Next, take nine leaves and twist them three in one branch. We attach them to the top of the wire. Then we wrap 6-7 branches of blue wisteria on the two remaining wires.
And so three trees. Then we dilute the plaster with water until it becomes thick sour cream and add a little super glue. Pour gypsum into the pot. We insert three wisteria on top and lightly cover the bottom of the trunks with plaster. I also inserted 3 green bushes (for the aquarium). Let it dry overnight.
Then paint the trunks with plaster. Since there is a thin layer of plaster, it will dry in half a day.
We lay out a path from small pebbles. At the back we use glue to build a fence with large stones.
Sprinkle the path with blue sparkles.
Let's make a bench. Take 2 matches and cut off the heads. Glue 3 cut toothpicks on top of them. We make the legs from the halves of one match. Glue perpendicularly. We connect with glue.
Glue the seat of the bench on top of the legs using toothpicks.
We place the finished bench near the tree. Sprinkle the bottom with green beads. Look how beautiful you have turned out.
Similar master classes
Particularly interesting
Comments (1)
