Love tree
Many people are fond of beadwork, because almost anything can be made from it! Today I will introduce you to making a Tree of Love from beads. For this we will need floss threads, beads and wire 0.3 ml (all in two colors) and scissors.
At this stage, we will need red wire and beads, and we will put the white color aside for now. So, cut off 15 cm of red wire and put 5 red beads on it. Move them to the middle and twist them as shown in the picture.
Now we again put 5 beads on one end of the wire and twist it.
We put 5 beads on again, only now on the other end of the wire and twist them.
We repeat all this until our branch has 4 petals on each side. We will need 15 of these.
Working according to the same scheme, we make 32 more things, only they should not have 4 petals, but 3.
For one branch we need 3 large branches and 6 small ones.
Now take white beads and white wire. We should have 32 small branches and 15 large ones. In the end it will be like this:
It's time to start forming the main 5 branches. Here's what we'll need:
To make our branch plump, cut about 50 pieces of 10-centimeter wire. Take a wire 0.4 ml thick. Let's start forming the branch. We take a twig that has 4 petals and wrap a piece of wire to it with floss threads.
Now we take a branch that has 3 petals and wrap it to the main branch. We attach a piece of wire and wrap it. The distance should be small, approximately as shown in the figure.
Do not forget to thicken the main branch with pieces of wire after every 2 branches. Add branches that have 3 petals. On each side you should get 4 branches of 3 petals. The last fifth branch is taken from 4 petals. This is the big branch you should get.
But we will have only one such large branch, we will make the remaining 4 branches without 1 branch (on each side) from three petals. But the last branch must have 4 petals. We will have 5 branches, with the largest branch in the center. We repeat everything with white branches.
Take the largest branch and tie a branch to it
We wrap each branch at a distance of approximately 3-4 centimeters. We do the same with white branches. It will turn out like this.
Straighten the branches and secure them with wire. But I did it a little differently. I took plaster of Paris and coated the branches with it. I also made a stand for our tree from plaster. I painted the finished composition with simple paints and decorated it a little with flowers, which I also made from beads.
This is such a beauty I got!!!
At this stage, we will need red wire and beads, and we will put the white color aside for now. So, cut off 15 cm of red wire and put 5 red beads on it. Move them to the middle and twist them as shown in the picture.
Now we again put 5 beads on one end of the wire and twist it.
We put 5 beads on again, only now on the other end of the wire and twist them.
We repeat all this until our branch has 4 petals on each side. We will need 15 of these.
Working according to the same scheme, we make 32 more things, only they should not have 4 petals, but 3.
For one branch we need 3 large branches and 6 small ones.
Now take white beads and white wire. We should have 32 small branches and 15 large ones. In the end it will be like this:
It's time to start forming the main 5 branches. Here's what we'll need:
To make our branch plump, cut about 50 pieces of 10-centimeter wire. Take a wire 0.4 ml thick. Let's start forming the branch. We take a twig that has 4 petals and wrap a piece of wire to it with floss threads.
Now we take a branch that has 3 petals and wrap it to the main branch. We attach a piece of wire and wrap it. The distance should be small, approximately as shown in the figure.
Do not forget to thicken the main branch with pieces of wire after every 2 branches. Add branches that have 3 petals. On each side you should get 4 branches of 3 petals. The last fifth branch is taken from 4 petals. This is the big branch you should get.
But we will have only one such large branch, we will make the remaining 4 branches without 1 branch (on each side) from three petals. But the last branch must have 4 petals. We will have 5 branches, with the largest branch in the center. We repeat everything with white branches.
Take the largest branch and tie a branch to it
We wrap each branch at a distance of approximately 3-4 centimeters. We do the same with white branches. It will turn out like this.
Straighten the branches and secure them with wire. But I did it a little differently. I took plaster of Paris and coated the branches with it. I also made a stand for our tree from plaster. I painted the finished composition with simple paints and decorated it a little with flowers, which I also made from beads.
This is such a beauty I got!!!
Similar master classes
Particularly interesting
Comments (3)
