Pin bracelet
Various accessories have always been something more for a girl than just a beautiful thing. It is thanks to various decorations that one can judge a person’s character. The color scheme, the material of the product, its image and many other qualities of the decoration can tell the interlocutor about the true values of a person. In accessories, I especially value not high cost and luxury, but simplicity and originality. The pin bracelet captivated me with just such qualities. It took me about half an hour of free time to create it, and its service life is unlimited. In addition, depending on the circumstances, it can be easily combined with a sporty style or worn for a trip to a cafe. To make it I needed:
Regular pins;
Elastic band for jewelry;
Beads;
Beads;
Pliers.
First of all, we collect beads on each pin.
I did this in no particular order, but you could have made some kind of pattern. To do this, it is enough to calculate the number of beads that fit on one pin, and, according to a preliminary sketch on paper, string beads of the selected shades.
After the opening part of the pin is filled, you need to close it and squeeze the head with pliers.This way you can be sure that while wearing it it will not open and hurt you.
On average, it takes about 30-35 pins for a slightly full hand.
When everything is prepared, you can start assembling the bracelet. To do this you will need two pieces of special elastic. It can usually be found in any craft or sewing store. The length of the piece should be equal to the circumference of the wrist + small tails in order to make a knot.
Now we begin to string pins onto one of the elastic bands, alternating them with beads.
You need to thread the elastic through the holes at the bottom of the pin. In addition, you need to make sure that all the pins are facing the same direction with the beaded side.
You need to string until the size of the resulting fringe in a calm position is equal to the volume of the wrist.
As soon as we realized that there is enough, we tie it all in a double knot and cut off the excess.
When tying, it is better not to stretch the elastic band, otherwise the bracelet will not fit on your hand. Now we repeat the stringing process for the lower part.
Our pin bracelet is ready.
Regular pins;
Elastic band for jewelry;
Beads;
Beads;
Pliers.
First of all, we collect beads on each pin.
I did this in no particular order, but you could have made some kind of pattern. To do this, it is enough to calculate the number of beads that fit on one pin, and, according to a preliminary sketch on paper, string beads of the selected shades.
After the opening part of the pin is filled, you need to close it and squeeze the head with pliers.This way you can be sure that while wearing it it will not open and hurt you.
On average, it takes about 30-35 pins for a slightly full hand.
When everything is prepared, you can start assembling the bracelet. To do this you will need two pieces of special elastic. It can usually be found in any craft or sewing store. The length of the piece should be equal to the circumference of the wrist + small tails in order to make a knot.
Now we begin to string pins onto one of the elastic bands, alternating them with beads.
You need to thread the elastic through the holes at the bottom of the pin. In addition, you need to make sure that all the pins are facing the same direction with the beaded side.
You need to string until the size of the resulting fringe in a calm position is equal to the volume of the wrist.
As soon as we realized that there is enough, we tie it all in a double knot and cut off the excess.
When tying, it is better not to stretch the elastic band, otherwise the bracelet will not fit on your hand. Now we repeat the stringing process for the lower part.
Our pin bracelet is ready.
Similar master classes
Particularly interesting
Comments (1)
