Volume bracelet made of rubber bands
A new direction has appeared in needlework - weaving from multi-colored elastic bands. Rainbow Loom sets are used for this.
A set of multi-colored rubber bands is designed for weaving jewelry. Toys and everything that has enough imagination and imagination. The most common jewelry made from rubber bands are bracelets. There are many weaving techniques. Bracelets can be woven in different shapes. Let's consider weaving a voluminous bracelet.
Materials you will need for work:
1. White and purple elastic bands.
2. Yellow rubber bands.
3. Clasp.
4. Hook for weaving.
5. Slingshot.
Stages of making a three-dimensional bracelet.
1. We put a yellow elastic band on the left side of the slingshot.
2. Stretch the elastic band, twist the free edge in the form of an “8”.
3. We put the resulting ring on the right side of the slingshot. This makes 8.
4. Then we put 2 yellow elastic bands on both parts of the slingshot.
5. After which we insert the hook under the first elastic band (the right side of the slingshot).
6. Remove this part of the elastic band from the slingshot.
7. Pull out the hook and release the elastic.
8. Thus, we do the same with the left side of the elastic band.
9. A knot is formed using 2 elastic bands.
10. We put on the next yellow elastic band.
11. Place the hook under the lower right part of the elastic band.
12. Remove this part from the slingshot.
13. Then pull out the hook and release the elastic.
14. We do the same with the left side of the elastic band.
15. In this way we weave part of the bracelet from 7 yellow elastic bands.
16. We put on a white and purple elastic band.
17. We continue to weave part of the bracelet of a different color. In this case, we use 7 elastic bands of this shade.
18. We braid the bracelet to the desired length. The elastic bands stretch well. Therefore, you can weave a smaller size.
19. A clasp is used to connect the edges of the bracelet. Attach the clasp with one edge to the free part of the bracelet.
20. And remove the second edge of the bracelet from the slingshot onto the hook.
21. Then we attach the second edge of the clasp to the bracelet. It turns out to be a vicious circle.
The finished bracelet looks beautiful and fashionable. Weaving a voluminous bracelet from rubber bands will take little time and will help diversify your daily leisure time.
A set of multi-colored rubber bands is designed for weaving jewelry. Toys and everything that has enough imagination and imagination. The most common jewelry made from rubber bands are bracelets. There are many weaving techniques. Bracelets can be woven in different shapes. Let's consider weaving a voluminous bracelet.
Materials you will need for work:
1. White and purple elastic bands.
2. Yellow rubber bands.
3. Clasp.
4. Hook for weaving.
5. Slingshot.
Stages of making a three-dimensional bracelet.
1. We put a yellow elastic band on the left side of the slingshot.
2. Stretch the elastic band, twist the free edge in the form of an “8”.
3. We put the resulting ring on the right side of the slingshot. This makes 8.
4. Then we put 2 yellow elastic bands on both parts of the slingshot.
5. After which we insert the hook under the first elastic band (the right side of the slingshot).
6. Remove this part of the elastic band from the slingshot.
7. Pull out the hook and release the elastic.
8. Thus, we do the same with the left side of the elastic band.
9. A knot is formed using 2 elastic bands.
10. We put on the next yellow elastic band.
11. Place the hook under the lower right part of the elastic band.
12. Remove this part from the slingshot.
13. Then pull out the hook and release the elastic.
14. We do the same with the left side of the elastic band.
15. In this way we weave part of the bracelet from 7 yellow elastic bands.
16. We put on a white and purple elastic band.
17. We continue to weave part of the bracelet of a different color. In this case, we use 7 elastic bands of this shade.
18. We braid the bracelet to the desired length. The elastic bands stretch well. Therefore, you can weave a smaller size.
19. A clasp is used to connect the edges of the bracelet. Attach the clasp with one edge to the free part of the bracelet.
20. And remove the second edge of the bracelet from the slingshot onto the hook.
21. Then we attach the second edge of the clasp to the bracelet. It turns out to be a vicious circle.
The finished bracelet looks beautiful and fashionable. Weaving a voluminous bracelet from rubber bands will take little time and will help diversify your daily leisure time.
Similar master classes
Particularly interesting
Comments (11)
