Hair clip “Bouquet”

The use of different colors when creating hairpins and clips is always at the peak of popularity. Their charming and familiar beauty can enhance any hairstyle.

To make the “Bouquet” clip you will need:

hairclip.
scissors.
satin ribbon in four shades: pink, cream, green and purple.
glue gun
centers for flowers with a diameter of 1.2 cm.
multi-colored sparkles.
lighter.

Creating decoration.

Ribbons 5 cm wide in purple and pink shades must be cut into even squares. You will need 12 pieces of beige parts, and 28 pieces of purple parts. The main flower should be prepared from a beige ribbon.

To do this, the square part should be folded in half, following the diagonal line drawn between the opposite corners of the workpiece.

Holding the part at a right angle, you need to turn the sharp corners towards the center, completely aligning the cuts.

On the resulting square, a strip of two folds is formed, along which it is necessary to bend the part in half, leaving these edges outside.

As a result, we get a rounded top of the petal. It remains to arrange the remaining parameters of the part.Uneven corners should be cut off and singed thoroughly.

Along the entire length of the petal, you need to cut 0.4 cm; the resulting sections, divided in half, should be completely scorched, protecting the tape from shedding.

This creates a rounded petal for the main flower.

Similar petals should be made from the remaining beige squares. Now we need to create the details for the purple flowers. To do this, the squares should be bent in half, forming a regular triangle.

Then the triangular piece needs to be folded in small folds, evenly distributing the distance between each fold.

As a result of these actions, the petal sections turn out to be uniform, so they need to be cut off and scorched with the fire of a lighter.

The result is a voluminous petal. From the remaining purple ribbon parts, you need to prepare 13 more petals.

Next you need to combine the prepared petals into flowers. 12 beige petals will produce a main flower with a large diameter. The petals should be connected in a circle, combining only their bases.

You need to make two small flowers from the purple petals. The parts should be fastened 7 pieces together, combining the bases at one point.

Now from a ribbon 2.5 cm wide in a bright pink shade you will need to make 11 equal squares with sides of 2.5 cm.

From the obtained parts you should prepare petals for small flowers. To create petals, it is necessary to repeat the sequence of making beige parts.

From all the bright pink squares you need to prepare such petals.

Then combine one flower with 7 petals and half a flower with 4 parts.

Now you can combine flowers for decoration. In the center of each inflorescence it is necessary to glue ready-made centers of rhinestones and beads.Then purple blanks should be attached on two sides of the main beige flower, and pink flowers should be attached to one another, pressing the petals tightly.

All that remains is to secure the bright pink flowers and complement the composition with green petals.

On the back of the bouquet you should attach a rounded piece made of beige ribbon, which will completely cover all the bases of the petals and their junctions.