How to stick protective glass on your phone

I would like to add that if you are gluing for the first time - few people succeed, so you can lightly sprinkle the sticky layer of the film (lightly!) with a solution of water and shampoo. It turns out that the film will “ride” along the surface and will not stick immediately, which will give time to carefully adjust it in all corners).

Interesting glass! It bends well.... it's an ordinary film, but glass is really "glass", hard, which does not bend. And with glass, the glue is located only along the edge, so it is glued only along the contour, and not over the entire surface like this film!

Hello!
Indeed, as Felicity noted, “few people succeed the first time.” But what if this “time” is the only one? And is there a high risk of getting poorly glued glass with lakes of air under it? But you can get excellent results the first time. But this requires an understanding of the essence of the process and appropriate equipment of the workplace.
First, I will describe the essence of the process.Since all objects are plastic, when manipulating them, they are easily electrified. And while the old film peels off, the screen is rubbed with a napkin, the film is removed from the new glass, the surface of the screen and the new glass become electrified and manage to attract microparticles from the air. Microparticles fall from clothes, scalp hair... You never know where! We cannot see them with the ordinary eye. But by gluing glass or film to the screen, they begin to be clearly visible as air bubbles. And it will not be possible to remove such a bubble, because the microparticle has already “glued” into the adhesive layer of glass or film. The air would be squeezed out during ironing, but the particle would not. But it creates some kind of cavity for air.
Therefore, the main requirement is to deelectrify the working volume, remove electrical charges from yourself, from clothes, from glass, from the screen.
For this;
1. Prepare a spray bottle. A very convenient bottle (25 - 50 ml) with a pressure sprayer made of ethyl alcohol (buy at a pharmacy). Fill an empty bottle with preferably distilled water with half a drop of Ferry. Read and consider Felicity's addition. Practice spraying thin layers on any item.
2. Choose the table at which you will work. There should be no passing air flows or drafts capable of carrying dust.
3. Wipe the table surface with a damp cloth with a small amount of Ferry. This will remove static from the table surface and remove and bind any remaining dust.
4. Boil a kettle with a spout in advance and place it on the work table on an electric stove, 30 - 40 centimeters from the work area. So that it gives a stream of steam passing 40 - 50 centimeters above the table. This steam will remove static from objects in the work area.But don't overdo it. There should be no condensation in the form of rain or showers.
5. Prepare all the components on the table.
6. Wash your hands and preferably your face with soap a couple of times. When washing your hands, you “ground” yourself through a stream of water (and water conducts electric current) through the water supply system. And you will wash away microparticles of skin and fat from your face. This will not only give you clean hands (which is very important), but also refresh yourself before work.
7. Perform all the operations described by the author of the article and use the add-on from Felicity. In 12–17 minutes, if you carefully read the article and recommendations, you will get beautifully glued glass without air inclusions.
Tested many times by svoimirukami!