Simple designer lamp

If any of you have dreamed of stylish lamp, then this wonderful, stylish, and most importantly simple lamp is for you. It will fill your room with even, unobtrusive light. Will create comfort and warmth of the atmosphere. And accordingly it will save your money.

What is needed to build our designer lamp?

1) You can use plain paper, but in gift wrapping places you can find paper that will add unusualness to your lamp. After all, your lamp can be not only classically white!

2) Glue, I used a quality glue gun.

3) Cartridge, wire, switch, plug. (I think it won’t be difficult for you to put these 4 things together).

4) Thin slats.

5) A square of plywood for the bottom of our lamp.

6) Light bulb, energy saving. The use of an incandescent lamp in this lamp is unacceptable!

First of all, we need to decide on the size of our cube. We spread out a sheet of our paper evenly and carefully begin gluing the walls and lid of our cube.

After the slats have been glued, the excess paper must be cut off.

After we are done with the sides of the cube (there should be five of them). Let's hit the bottom.

It must be cut exactly to the size of the walls. To begin, we attach the socket for our lamp. Next, we glue vertical slats at the corners of the bottom to strengthen the walls.

Then we begin gluing the walls of our lamp. They must be carefully glued to the bottom, to the vertical slats and to each other. For lightness, the structure can be temporarily secured with tape. After finishing with the walls, you can also attach the top of our cube.