Felt cup case

A quite fashionable accessory and a very original gift is a felt case for a tea or coffee cup, which will certainly create a positive mood during a morning or evening meal at the family table or with friends.
The design of such cases can be varied. It depends on who exactly is the owner of the cup decorated in this way.
Perhaps any woman will like a cup dressed in an elegant blouse with polka dots, fashionable at all times, with a classic collar.
To make such a case you will need:

Red felt with white polka dots, 1 mm thick;
Fragment of white felt;
Five white beads;
Scissors;
Silicone glue;
White Velcro for sewing products.

You need to cut two strips from the selected felt. The width and height of the first will depend on the height and diameter of the cup. The size of the second strip is based on the width of the cup handle opening.

The rectangle of adhesive tape should be divided into two halves, one of which should be glued in the middle of the inner edge of the wide felt strip, and the second - on the front side of the narrow strip.

Having determined the length of the wide felt strip by the circumference of the cup, the narrow strip is attached using silicone glue to the back side of the wide strip.

At the top of the future case, closer to its edge, which will subsequently be next to the handle of the cup, glue a blouse collar cut out of white felt, after which the excess part of the main felt remaining on top of the collar is cut out.

Following down from the neckline of the collar, five white beads imitating blouse buttons are placed on silicone glue at the same distance from each other.