Case for flash drive made from marker

Everything unusual is always interesting and cool. In this article I will show you how to make a funny case for a flash drive from a marker.

We will need:

1) epoxy glue (epoxy)

2) flash drive

3) felt-tip pen according to the size of the flash drive

disassemble the marker

cut off the head (what to write) insert the flash drive

spread the glue, seal all the holes with masking tape

pour epoxy inside, place it closer to the battery, wait until it dries.

voila, the flash drive is ready!

come back

Comments (7)

#1 purgen2013 Guests November 26, 2011 10:54
0

Damn, I found a broken down, non-working mp3 player and use it as a flash drive. It does not have a case, and the board is large.I wanted to make a body, but I don’t know what from! Please advise...
- Answer
#2 Trismegist Guests 24 May 2012 16:46
1

purgen2013, so take some kind of box, now they sell so much junk in stores: tick-tock, mentos...
Down with the content and embed the player.
- Answer
#3 Trismegist Guests 24 May 2012 16:52
0

By the way, not a bad solution for those who are not allowed into work with USB devices... :lol:
- Answer
#4 spec72 Guests June 14, 2012 02:12
0

And for my schoolgirl daughter, I built a flash drive into a lipstick tube. It turned out cool for a girl
- Answer
#5 self-taught Guests 17 June 2012 10:55
0

purgen2013,
You can fit a larger size of heat shrink; it will fit from the outside and cover the board with memory in its depths. and it will be unclear what it is figь with usb. You can use it as a pendant or even mount it in a children’s wristwatch with a huge size. fake cigarette pack, lighter, lighter refill bottle, zippo lighter.
- Answer
#6 Some nobody Guests 16 August 2013 22:32
0

Grandma, is that you? =D
- Answer
#7 Aliaska Guests 22 August 2017 23:34
0

Thanks, great idea! There are a lot of flash drives lying around with broken casings, I’m afraid to even pick them up, they seem to crumble. I'll go find some markers and fix it.
- Answer