A broken cable often occurs when repairing electronic devices. It is not always possible to quickly buy and replace it. Sometimes it’s faster to repair and restore it yourself. The matter here is not tricky, but it will require some skill.
Using adhesive tape or adhesive tape, we fix the sections of the cable on a flat surface on both sides, minimizing the gap distance.
Holding it with tweezers very carefully and carefully clean the ends of the tear paths on both sides.
Use a cotton swab dipped in alcohol to remove all cleaning products.
Using a temperature-controlled soldering iron, we carefully tin the ends of the tracks (If you don’t have one, then it’s time to buy one, it’s not in short supply: Temperature-controlled soldering irons at an affordable price on AliExpress - http://alii.pub/5mbqrt). For tinning, it is better to use solder paste.
Next, we take a copper core from a stranded wire and earn it. Choose the thickness depending on the thickness of the tracks on the cable.We solder the core into the gap in the cable tracks.
Do not cut, hold the edge with tweezers, and break off with rocking movements.
After soldering, use a cotton swab moistened with alcohol to remove the soldering products.
Apply UV varnish and dry with a UV lamp.
Turn it over, degrease it with alcohol and also apply varnish. Let's dry it.
At this point, the cable has been restored and is ready for use.
