How to make wireless charging for a smartphone

Making wireless charging for your cell phone yourself is quite simple. This charger is suitable for any smartphone model with this function. If your smartphone does not have such a function, then how to simply add it there, see here - https://home.washerhouse.com/en/6082-kak-nadelit-ljuboj-telefon-funkciej-besprovodnoj-zarjadki.html

The body of the device will be completely made by hand from PVC pipe.

Will need

• A piece of thin-walled PVC pipe.
• Wireless charging module - http://alii.pub/5x4636
• Mini USB - http://alii.pub/5x466v

Making your own wireless charging

Cut a piece of thin PVC pipe lengthwise. Heat with a hairdryer until soft.

Straighten using a rectangular metal or wooden object. We mark a 10.5x6.5 cm rectangle on the resulting blank and cut it out with scissors. Two such blanks are needed.

Using a compass, we mark the corners for rounding.

Grind down the corners using sandpaper.

We cut out strips of sides from thin plastic.

We bend the corners around the circumference and glue them to the base using superglue.

Using a sharp utility knife, make a slot for the mini USB. We glue the socket into the body.

Glue the coil of the wireless charging module to the second plastic blank.

We solder the contacts from the charging module to the mini USB connector and insulate them with heat shrink.

Close the case and fix it with glue.

We connect the 5 V power supply to the wireless charging module.

Wireless charging is ready. Now, if you place a phone with a wireless charging function on it, it will begin to charge.

Watch the video