Making a muffler for a home trimmer
Using a trimmer or lawn mower in a summer cottage makes caring for the area much easier. Often such equipment operates quite loudly, which can create some inconvenience. The solution may be to make a small muffler for the exhaust system of the trimmer.
What you need to prepare:
- Metal plate, 3-6 mm thick;
- A piece of pipe 15-20 cm long;
- Several sections of pipe of smaller diameter (for mounting the muffler to the engine);
- Metal strip with holes for bolts;
- Stone or mineral wool.
High-quality and durable drills on AliExpress at a discount
Making a muffler for a lawn mower with your own hands
From a thick metal plate you need to cut two disks with the diameter of a larger pipe. To make marking easier, you can place the pipe on the plate and trace it with a marker. You can adjust a more accurate circle using a grinder and a grinding disc.
After finishing the circles, it is necessary to mark the center in them and drill holes with a diameter smaller than the pipe. It will be located in the center of the entire structure. When drilling with a crown, it is recommended to cool the metal with water - this will preserve the crown and speed up the process.
After the circles are prepared, you need to fix a pipe of smaller diameter in one of them, after drilling holes in it.
Long-lasting discs for angle grinders on AliExpress at a discount.
Everything needs to be connected so that on one side of the circle the pipe offset is 4-5 cm. Then a larger diameter pipe must be welded onto the round base so that they fit into one another. It is important that the pipe walls are parallel and the weld seam is solid.
Upon completion of the welding work, it is necessary to fill the space between the pipes with noise-absorbing material. Mineral or stone wool works well. It is resistant to high temperatures, so it is not afraid of fire. It is recommended to lay the cotton tightly, but without applying excessive force.
When the space is filled, you can weld a second metal circle.
After assembling the main part of the muffler, you can begin making the muffler mounting to the engine. On a small metal strip you need to drill two holes according to the markings of the bolted connection on the engine.
Then the bar must be welded to the muffler pipe. It is better to process all welding seams with a grinder with a cleaning disc.
Welding electrodes for general purposes on AliExpress at a discount.
After final assembly, the finished muffler can be painted with paint that is resistant to high temperatures.
The protective casing must be modified before installation.
Thanks to its design, as well as the mineral wool, the muffler will absorb most of the exhaust sounds. This makes it possible to carry out gardening work even in the morning, without disturbing anyone.
