Unusual knitted earrings
Knitted jewelry is very popular today. Beads, earrings, brooches, bracelets of various colors, shapes and sizes. Today I will teach you how to knit round spherical earrings from three threads of different colors. We will knit a little unusually. The colors will, as it were, crash into the bead and be located on it in chaotic spots of different sizes.
For two earrings with a diameter of approximately 4 cm you will need:
- three skeins of thread of the same thickness, but different colors;
- two pins;
- two earrings;
- two rings;
- scissors;
- hook;
- wire cutters;
- a strong thin thread of a suitable shade for the warp, if there are no pins of a suitable length.
The round bead should always start from an amigurumi loop unless you want to end up with a hole on one side. It’s easy to do: first we fold the thread into a loop so that the main thread and its end point in different directions.
Next, you need to tie the resulting loop with five single crochets. However, since our bead will consist of three colors, which will be chaotically “scattered”, we will tie it a little unusually. First we make two single crochets and do not complete the third one.
We finish the third stitch with a thread of a different color and use it to make two more single crochets.
Now we tighten our amigirumi loop and connect the last column to the first. Next, we make an unfinished single crochet again and bring it to the end with a green thread. We make one and a half columns and end up on a gray thread. Thus, gradually adding new spots, you need to form the entire bead.
We knit the first three columns with increases to make a “pancake”.
After this, we knit without any additions so that the “pancake” turns into a bag. This will take about three or four more rows.
The resulting bag must be filled tightly with padding polyester. The half bead should be round and dense enough to hold its shape. The next three rows must be knitted with decreasing stitches. From each row you need to decrease five loops, but not in a row, but through several knitted stitches.
Thus we must knit two beads of the same size. When they are ready, you need to carefully insert the pins through them and make loops at the end, from which we will hang the beads.
We thread the rings through the pin rings and hang the beads on the pins.
So, quite quickly and not so difficult, we made original and unusual knitted earrings from threads of three different colors.
For two earrings with a diameter of approximately 4 cm you will need:
- three skeins of thread of the same thickness, but different colors;
- two pins;
- two earrings;
- two rings;
- scissors;
- hook;
- wire cutters;
- a strong thin thread of a suitable shade for the warp, if there are no pins of a suitable length.
The round bead should always start from an amigurumi loop unless you want to end up with a hole on one side. It’s easy to do: first we fold the thread into a loop so that the main thread and its end point in different directions.
Next, you need to tie the resulting loop with five single crochets. However, since our bead will consist of three colors, which will be chaotically “scattered”, we will tie it a little unusually. First we make two single crochets and do not complete the third one.
We finish the third stitch with a thread of a different color and use it to make two more single crochets.
Now we tighten our amigirumi loop and connect the last column to the first. Next, we make an unfinished single crochet again and bring it to the end with a green thread. We make one and a half columns and end up on a gray thread. Thus, gradually adding new spots, you need to form the entire bead.
We knit the first three columns with increases to make a “pancake”.
After this, we knit without any additions so that the “pancake” turns into a bag. This will take about three or four more rows.
The resulting bag must be filled tightly with padding polyester. The half bead should be round and dense enough to hold its shape. The next three rows must be knitted with decreasing stitches. From each row you need to decrease five loops, but not in a row, but through several knitted stitches.
Thus we must knit two beads of the same size. When they are ready, you need to carefully insert the pins through them and make loops at the end, from which we will hang the beads.
We thread the rings through the pin rings and hang the beads on the pins.
So, quite quickly and not so difficult, we made original and unusual knitted earrings from threads of three different colors.
Similar master classes
Particularly interesting
Comments (0)
