Painting with a three-dimensional pattern
You don't know what to give your mother, grandmother or teacher for her birthday. We suggest making a painting with a three-dimensional pattern in the shape of a flower. The craft is made from inexpensive materials. The technology shown in the master class will allow you to create paintings of different subjects, since using this method you can create blanks for paintings of different shapes: circle, square, oval, triangle, rhombus, etc. It all depends on your imagination.
To work you will need:
1) Colored plastic bottles: green, yellow, red.
2) A piece of white plastic.
3) Scissors.
4) Ceiling tiles are white.
5) Glue gun.
6) Stove.
7) A sheet of paper.
For crafts we will need plastic bottles of three colors: green, red, yellow. A piece of plastic can be cut from a ten-liter bucket of construction mixtures. If regular scissors won't cut it, use garden shears or tin snips. The size of the background of the painting is 16 by 23 centimeters.
1) Leaf manufacturing technology.
Making the side part of the leaf. We cut out hoops from a plastic bottle, then a strip two centimeters wide and 13 centimeters long.If you want the leaf size to be different (smaller or larger), the strip should be made longer or shorter, respectively.
We bend the strip into a leaf on both sides.
We round one edge of the leaf using an electric stove.
We cut out the base of the leaf from a plastic bottle and ceiling tile.
We connect all the received parts together.
We cut off the edges of the sides of the leaf, measure with a ruler and leave the width at 1.3 centimeters.
We round off the remaining edge of the leaf using an electric stove. According to this technology, we make five more green leaves.
2) Technology for making a flower petal.
Making flower petals is the same as the technology for making leaves. Except: you only need to bend the strip from the bottle for the petal on one side, the other side remains rounded. It turns out to be a droplet shape. We make four such petals: two red and two yellow.
3) Stem manufacturing technology.
Take a ready-made green leaf. We leave only the side part.
We bend the sheet, bending it every 5-7 millimeters. Glue the resulting leaves, petals and stem to a piece of white plastic using a glue gun, place under the press for a while until the glue dries.
The painting with a three-dimensional pattern “Flower” is ready.
This picture can be inserted into a ready-made or homemade frame; it will look good in a wooden frame. The picture can be hung on the wall, or you can make a leg for it to stand on. Using this technology you can make paintings of different subjects. If you cannot find yellow and red bottles, you can use a clear bottle and paint the manufactured parts with acrylic paints.Using a different color ceiling tile will change the color of the petals and leaves. The background for the picture can be made of wood, glass, cardboard. The background can also be painted with acrylic paints. Experiment.
To work you will need:
1) Colored plastic bottles: green, yellow, red.
2) A piece of white plastic.
3) Scissors.
4) Ceiling tiles are white.
5) Glue gun.
6) Stove.
7) A sheet of paper.
For crafts we will need plastic bottles of three colors: green, red, yellow. A piece of plastic can be cut from a ten-liter bucket of construction mixtures. If regular scissors won't cut it, use garden shears or tin snips. The size of the background of the painting is 16 by 23 centimeters.
1) Leaf manufacturing technology.
Making the side part of the leaf. We cut out hoops from a plastic bottle, then a strip two centimeters wide and 13 centimeters long.If you want the leaf size to be different (smaller or larger), the strip should be made longer or shorter, respectively.
We bend the strip into a leaf on both sides.
We round one edge of the leaf using an electric stove.
We cut out the base of the leaf from a plastic bottle and ceiling tile.
We connect all the received parts together.
We cut off the edges of the sides of the leaf, measure with a ruler and leave the width at 1.3 centimeters.
We round off the remaining edge of the leaf using an electric stove. According to this technology, we make five more green leaves.
2) Technology for making a flower petal.
Making flower petals is the same as the technology for making leaves. Except: you only need to bend the strip from the bottle for the petal on one side, the other side remains rounded. It turns out to be a droplet shape. We make four such petals: two red and two yellow.
3) Stem manufacturing technology.
Take a ready-made green leaf. We leave only the side part.
We bend the sheet, bending it every 5-7 millimeters. Glue the resulting leaves, petals and stem to a piece of white plastic using a glue gun, place under the press for a while until the glue dries.
The painting with a three-dimensional pattern “Flower” is ready.
This picture can be inserted into a ready-made or homemade frame; it will look good in a wooden frame. The picture can be hung on the wall, or you can make a leg for it to stand on. Using this technology you can make paintings of different subjects. If you cannot find yellow and red bottles, you can use a clear bottle and paint the manufactured parts with acrylic paints.Using a different color ceiling tile will change the color of the petals and leaves. The background for the picture can be made of wood, glass, cardboard. The background can also be painted with acrylic paints. Experiment.
Similar master classes
Particularly interesting
Comments (0)
