Cork wobbler
The hot summer begins to lose its strength. Very soon the temperature will drop a little and the long-awaited autumn will come, when fishermen will take up their spinning rods. A huge number of baits will fly into the expanses of water, with only one purpose - to attract the attention of hunting predatory fish. However, you should not give preference only to store-bought spinners, wobblers and other fishing lures. Without much effort or expense, you can make your own attractive tackle that will work great and bring decent catches. Today I want to talk about how to make a catchy wobbler from a beer cap with your own hands, which is suitable for perch fishing.
To make a homemade simple wobbler you will need:
• beer stopper;
• paper clips;
• 2 small screws;
• triple or double hook with a winding ring;
• swivel with clasp;
• Styrofoam;
• wire cutters.
The process of making a homemade wobbler with your own hands:
1. Take a beer cap and bite off 3 cloves on both sides as shown in the photo. You should have a tail and a front blade.
2. Then with our hands we squeeze the rounded parts of the iron plug towards each other. The result should be a blank for the future wobbler. You can see it in the photo.
3. Cut off a piece of foam plastic with a stationery knife and place it inside a homemade wobbler. This will help increase the buoyancy of the bait and excellent performance when fishing in a pond.
4. We make a hole in the tail blade and use a self-tapping screw to attach a swivel with a clasp and a hook.
5. We make a core from a paper clip that will connect the tail part to the front part and will be attached to the fishing line. The photo shows how to secure this part of the wobbler.
6. It turns out to be an excellent homemade perch wobbler. Now all that remains is to go to the pond, adjust the tilt of the front blade and enjoy catching striped predators.
You can always change the double hook to a triple hook, add or remove the red plastic tail and, as a result of trials and experiments, achieve trouble-free catchability. I wish all anglers a warm autumn and good fishing. Don't be lazy and make your own fishing lures. Good luck!
To make a homemade simple wobbler you will need:
• beer stopper;
• paper clips;
• 2 small screws;
• triple or double hook with a winding ring;
• swivel with clasp;
• Styrofoam;
• wire cutters.
The process of making a homemade wobbler with your own hands:
1. Take a beer cap and bite off 3 cloves on both sides as shown in the photo. You should have a tail and a front blade.
2. Then with our hands we squeeze the rounded parts of the iron plug towards each other. The result should be a blank for the future wobbler. You can see it in the photo.
3. Cut off a piece of foam plastic with a stationery knife and place it inside a homemade wobbler. This will help increase the buoyancy of the bait and excellent performance when fishing in a pond.
4. We make a hole in the tail blade and use a self-tapping screw to attach a swivel with a clasp and a hook.
5. We make a core from a paper clip that will connect the tail part to the front part and will be attached to the fishing line. The photo shows how to secure this part of the wobbler.
6. It turns out to be an excellent homemade perch wobbler. Now all that remains is to go to the pond, adjust the tilt of the front blade and enjoy catching striped predators.
You can always change the double hook to a triple hook, add or remove the red plastic tail and, as a result of trials and experiments, achieve trouble-free catchability. I wish all anglers a warm autumn and good fishing. Don't be lazy and make your own fishing lures. Good luck!
Similar master classes
Particularly interesting
Comments (0)
