Children's furniture - high chair
The child grows, new needs appear: a high chair, for example. It turned out that in the store a quality item costs at least 4000 rubles. And safety is the most important thing.
Materials:
1. 10 mm birch plywood, sold in sheets of 1.5 m * 1.5 for approximately 300 rubles. You will need one sheet, of course, not delaminated;
2. Furniture corner 15*15 – 20 pieces. Various corner options are possible;
3. Furniture self-tapping screw – 9mm – 40 pieces. There is a large selection, you might like something;
4. Stain or furniture varnish – nuances to choose from;
Tools:
• Pencil, square, tape measure;
• A jigsaw or a good hacksaw is an important and obvious factor;
• Screwdriver or screwdriver – there would be a desire to twist;
• Coarse sandpaper. It will take very little;
Making a high chair with your own hands is based on a simple algorithm:
1. We choose sizes and shapes individually for your child, as well as taking into account the available tools, and draw them to scale on paper, and then transfer them to plywood. It is recommended to draw identical or mirror parts by tracing the first one;
2.Sawing is the most difficult and time-consuming process. This is where you'll most likely regret not asking your friend for a jigsaw, although it all depends on the complexity of the shapes. The sawn edges are then processed with sandpaper;
3. Assembling our construction set will take much less time if you use, for example, a drill, in the absence of a screwdriver. And generous use of the corners will give the product additional strength. It is important to prevent the screws from being overtightened to avoid losing their meaning;
4. By covering the chair with varnish, for example, “mahogany”, we get a reliable, attractive and inexpensive object furniture. By the way, the amount of expenses did not exceed 600 rubles.
Materials:
1. 10 mm birch plywood, sold in sheets of 1.5 m * 1.5 for approximately 300 rubles. You will need one sheet, of course, not delaminated;
2. Furniture corner 15*15 – 20 pieces. Various corner options are possible;
3. Furniture self-tapping screw – 9mm – 40 pieces. There is a large selection, you might like something;
4. Stain or furniture varnish – nuances to choose from;
Tools:
• Pencil, square, tape measure;
• A jigsaw or a good hacksaw is an important and obvious factor;
• Screwdriver or screwdriver – there would be a desire to twist;
• Coarse sandpaper. It will take very little;
Making a high chair with your own hands is based on a simple algorithm:
1. We choose sizes and shapes individually for your child, as well as taking into account the available tools, and draw them to scale on paper, and then transfer them to plywood. It is recommended to draw identical or mirror parts by tracing the first one;
2.Sawing is the most difficult and time-consuming process. This is where you'll most likely regret not asking your friend for a jigsaw, although it all depends on the complexity of the shapes. The sawn edges are then processed with sandpaper;
3. Assembling our construction set will take much less time if you use, for example, a drill, in the absence of a screwdriver. And generous use of the corners will give the product additional strength. It is important to prevent the screws from being overtightened to avoid losing their meaning;
4. By covering the chair with varnish, for example, “mahogany”, we get a reliable, attractive and inexpensive object furniture. By the way, the amount of expenses did not exceed 600 rubles.
Similar master classes
Particularly interesting
Comments (2)
