How to bend a pipe at any angle without a bending tool

When you try to bend a pipe without a pipe bender, it often simply crumples in one place. To prevent this, sand is usually poured into it and the holes are plugged so that it does not spill out. This usually helps, but makes the process much more difficult. The proposed method allows you to bend the pipe at any angle much faster.

What you will need:

• wooden beam;
• wire or rope.

The process of bending a pipe without a bending tool

It is necessary to attach the pipe to a strong block at least 60-80 cm long. Then they are wrapped together with wire or rope. About 15-20 turns are needed, after which the edges are tied. It is better to place the coils closer to one of the edges of the bar. Then you need to put your foot on its second end, rest on it and bend the pipe slightly upward. After this, it is pushed to the turns by 5-15 mm and another hem is made. By moving the pipe away from you and pulling it up little by little, you need to set the bending radius and bring it to the desired angle. Due to the elasticity of the wire or rope, the wall will not break.Everything will come out neatly without choke.

Watch the video

See another way to bend a pipe without special tools - https://home.washerhouse.com/en/6236-kak-sognut-trubu-bez-zalomov-i-trubogiba.html