Steel pipe ring
A ring, a type of ring, is predominantly a masculine adornment, and made of “noble metal” emphasizes the status of its owner.
Now there are a lot of varieties and shapes of rings and everyone can find something of their own, but if you want something original that will highlight your style and give you the opportunity to prove yourself as a novice jeweler, this article is for you.
And so we need:
Any piece of steel (copper or brass) pipe, in general, that you can get, the internal diameter of the pipe should correspond to the diameter of your finger on which you will make the ring.
Next, we need to saw off the prepared section of pipe at an angle; the larger the angle, the wider the front part of the ring will be and, accordingly, the narrower the back.
Once you have decided on the angles, we will saw the future workpiece, do not be discouraged if it does not look attractive yet. Everything is ahead!
Next, we decide on the front (wide) side of the ring. If you want to make a rectangular one like mine, then clamp the workpiece perpendicularly in a vice and file it to the desired state.
Then we grind off all the sharp corners and protrusions on the sides.
After you have given the ring the desired shape, let's start with the drawing - the choice is unlimited, it all depends on your imagination and the availability of the necessary tools, if you are good with metal etching, you can get a very good and interesting drawing, I settled on the classics and made a couple of cuts on the sides and 3 diagonally, then the tedious grinding process begins, if you have a power tool for polishing, this will greatly facilitate the polishing process, if you do not have the necessary tool, take a coarse sandpaper and level out rough irregularities, then take the very fine sandpaper that you can find in a circular pattern start polishing the ring with movements to remove all scratches.
And lastly, if you want to make your ring shiny, you need to rub it with goyim paste using a rag.
Using this method, if you have the desire and imagination, you can create unique designer products, everything is in your hands, good luck with your homemade products.
Production video:
Now there are a lot of varieties and shapes of rings and everyone can find something of their own, but if you want something original that will highlight your style and give you the opportunity to prove yourself as a novice jeweler, this article is for you.
And so we need:
Any piece of steel (copper or brass) pipe, in general, that you can get, the internal diameter of the pipe should correspond to the diameter of your finger on which you will make the ring.
Next, we need to saw off the prepared section of pipe at an angle; the larger the angle, the wider the front part of the ring will be and, accordingly, the narrower the back.
Once you have decided on the angles, we will saw the future workpiece, do not be discouraged if it does not look attractive yet. Everything is ahead!
Next, we decide on the front (wide) side of the ring. If you want to make a rectangular one like mine, then clamp the workpiece perpendicularly in a vice and file it to the desired state.
Then we grind off all the sharp corners and protrusions on the sides.
After you have given the ring the desired shape, let's start with the drawing - the choice is unlimited, it all depends on your imagination and the availability of the necessary tools, if you are good with metal etching, you can get a very good and interesting drawing, I settled on the classics and made a couple of cuts on the sides and 3 diagonally, then the tedious grinding process begins, if you have a power tool for polishing, this will greatly facilitate the polishing process, if you do not have the necessary tool, take a coarse sandpaper and level out rough irregularities, then take the very fine sandpaper that you can find in a circular pattern start polishing the ring with movements to remove all scratches.
And lastly, if you want to make your ring shiny, you need to rub it with goyim paste using a rag.
Using this method, if you have the desire and imagination, you can create unique designer products, everything is in your hands, good luck with your homemade products.
Production video:
Similar master classes
How to reduce the diameter of a steel pipe by friction
How to make a tool handle from a plastic pipe
How to make a high-quality pipe saddle for angled tapping
How to make a 90 degree pipe saddle
How to make a shaped vegetable knife from a piece of PVC pipe
How to quickly make a bearing housing from a pipe
Particularly interesting
Comments (1)
