Light a light bulb with your fingers

Good day to all. In this article I will tell you how to make an interesting trick and surprise your friends. The trick is quite simple, but it will require you to make a certain device - a light bulb.
For this we need:
Two frosted light bulbs, absolutely any size. We also need a lighter with a flashlight and a couple of small wires.

Once everything is prepared, we begin production.
Let's separate the base and bulb from the light bulb, solder one wire to the body of the base, and the other to the very bottom of the base, separated by insulation.

Tolerate, take the flashlight out of the lighter, and solder the end of the wire from the base body to the plus side to the flashlight batteries, and the other, from the bottom of the base to the minus LED.

To light it up Light-emitting diode we need to close the circuit, to do this we cut off one of the small wires from the wire, soldering one end to the body, and bend the other end along the insulation on the base.

In order for the light bulb to light up, we imperceptibly move the wire with our finger, closing the circuit. All that remains is to glue the flask to the base, and you can go surprise your friends.