Mobile boiler
Nowadays, the problem of housing has become as urgent as it once was. Young couples, having gotten married, mostly decide to live in a rented apartment. But most often it’s simply impossible to stay in one place for a long time, so you have to constantly transport various things, including the boiler, if you have one. It is clear that there is no particular point in firmly securing it in someone else’s apartment, but what to do if there is a boiler, but due to constant moving you cannot use it. This is where a device similar to a stool will help; it will serve as the basis for installing the boiler. Thanks to this design, the boiler can be easily removed and installed in a short time.
The base frame is made of wooden beams. The two main beams on which the boiler is actually attached must be thick enough to support a weight of 120 kilograms. A hole is drilled at the top of these bars for the boiler mounting eyes.
The remaining supporting bars may be of a smaller cross-section, the main thing is that the structure is stable.
The bars are connected to each other using self-tapping screws, having previously drilled holes for their installation. They should be slightly smaller in diameter than the screws. To make the structure even more stable, a profile and additional tension plates are used.They are also secured with wood screws.
Since different boiler models have different sizes, design data is not given here. This needs to be done as you work. When the chair itself is ready, we place the boiler on it, opposite the holes in the main bars, and secure it with long bolts.
Where the boiler body comes into contact with the wooden base, you need to place pieces of rubber.
You can connect the boiler using flexible hoses that are one and a half meters long. This can be done both in the bathroom and in the kitchen.
It all depends on where it is more convenient. The boiler can be connected to the electrical network by connecting a cord with a plug.
It happens like this. that there is an outlet right next to it, if there is none, use a carrier.
It is clear that such a design takes up extra space, but you will always have hot water wherever you are.
The base frame is made of wooden beams. The two main beams on which the boiler is actually attached must be thick enough to support a weight of 120 kilograms. A hole is drilled at the top of these bars for the boiler mounting eyes.
The remaining supporting bars may be of a smaller cross-section, the main thing is that the structure is stable.
The bars are connected to each other using self-tapping screws, having previously drilled holes for their installation. They should be slightly smaller in diameter than the screws. To make the structure even more stable, a profile and additional tension plates are used.They are also secured with wood screws.
Since different boiler models have different sizes, design data is not given here. This needs to be done as you work. When the chair itself is ready, we place the boiler on it, opposite the holes in the main bars, and secure it with long bolts.
Where the boiler body comes into contact with the wooden base, you need to place pieces of rubber.
You can connect the boiler using flexible hoses that are one and a half meters long. This can be done both in the bathroom and in the kitchen.
It all depends on where it is more convenient. The boiler can be connected to the electrical network by connecting a cord with a plug.
It happens like this. that there is an outlet right next to it, if there is none, use a carrier.
It is clear that such a design takes up extra space, but you will always have hot water wherever you are.
Similar master classes
Particularly interesting
Comments (0)
