Envelope for wedding disc
To make such a disk, we need to take: Now we will look at a master class on making an envelope for wedding disks. You can use this envelope as a money envelope, and the young people themselves will put their CDs in it and keep them.
• Watercolor sheet of A3 paper;
• Mint-colored scrap paper measuring 30*30 cm;
• Picture with swans;
• Stamp “Happy Wedding Day” and green-blue ink;
• Cutting: napkin, large heart, glasses and a bottle of champagne, all cutting in turquoise and mint colors;
• Natural lace of menthol color;
• Fabric roses on a white ribbon;
• White paper hydrangea flowers with a diameter of 25 mm;
• Bouquets of complex stamens mint and white with glitter;
• Satin mint ribbon 2.5 cm wide;
• Organza ribbon 2.5 cm mint color;
• White latex rose;
• Shiny mint cabochon;
• Curb hole punch;
• Mint-colored pearl half-beads with a diameter of 6 mm;
• Lighter, ruler, double-sided tape, scissors, pencil, heat gun.
Let's start with the base for our envelope. We place the A3 sheet vertically and divide it into dimensions of 15*15 cm on top and on the sides.
Draw a bend line below the ruler. Below the bend line we retreat further down on the sides by 8.5 cm.
We cut off the excess. Thus, the envelope itself will be 15 cm, and the inner pocket for the disk will be 8.5 cm. Now we divide the entire base in half and draw a vertical bending line.
Fold the pocket inward, go well along the bend line to fold the pocket well.
And we fold the envelope in half, it turns out to be square, measuring 15*15 cm. We unfold the base and go through the top of the pockets with a border hole punch.
We get border lace pockets. Cut the satin ribbon, approximately two pieces of 17-18 cm each.
We glue it with double-sided tape on the front and back of the envelope base. The base itself is ready, now we move on to working with scrap paper.
We cut out squares of paper 14.7 * 14.7 cm and rectangles for pockets 8 * 14.7 cm. We immediately glue the rectangles onto the pockets and one square onto the back base of the envelope.
Glue a napkin onto the front square, and glue a picture of swans onto the napkin. On a separate piece of watercolor we stamp “Happy Wedding Day.” We tint the picture and the inscription along the edges with the same pad that we stamped the inscription on. Glue the inscription below and sew on a picture with the inscription.
Glue the square onto the base and sew separately the front part and the back part of the envelope separately.
We glue glasses and a bottle inside, and try on decorations outside. We tie an organza bow, make a mini bouquet of stamens and a flower, cut off a strip of lace and a strip of ribbon with roses.
We glue the heart with a glue stick, and glue all the other decorations with a heat gun.
The result is a delicate mint envelope for wedding CDs. On present The best option for newlyweds. You can invest money in it and give it as a gift, and the envelope itself will remain as packaging for wedding CDs.Thank you for your attention and see you all again.
• Watercolor sheet of A3 paper;
• Mint-colored scrap paper measuring 30*30 cm;
• Picture with swans;
• Stamp “Happy Wedding Day” and green-blue ink;
• Cutting: napkin, large heart, glasses and a bottle of champagne, all cutting in turquoise and mint colors;
• Natural lace of menthol color;
• Fabric roses on a white ribbon;
• White paper hydrangea flowers with a diameter of 25 mm;
• Bouquets of complex stamens mint and white with glitter;
• Satin mint ribbon 2.5 cm wide;
• Organza ribbon 2.5 cm mint color;
• White latex rose;
• Shiny mint cabochon;
• Curb hole punch;
• Mint-colored pearl half-beads with a diameter of 6 mm;
• Lighter, ruler, double-sided tape, scissors, pencil, heat gun.
Let's start with the base for our envelope. We place the A3 sheet vertically and divide it into dimensions of 15*15 cm on top and on the sides.
Draw a bend line below the ruler. Below the bend line we retreat further down on the sides by 8.5 cm.
We cut off the excess. Thus, the envelope itself will be 15 cm, and the inner pocket for the disk will be 8.5 cm. Now we divide the entire base in half and draw a vertical bending line.
Fold the pocket inward, go well along the bend line to fold the pocket well.
And we fold the envelope in half, it turns out to be square, measuring 15*15 cm. We unfold the base and go through the top of the pockets with a border hole punch.
We get border lace pockets. Cut the satin ribbon, approximately two pieces of 17-18 cm each.
We glue it with double-sided tape on the front and back of the envelope base. The base itself is ready, now we move on to working with scrap paper.
We cut out squares of paper 14.7 * 14.7 cm and rectangles for pockets 8 * 14.7 cm. We immediately glue the rectangles onto the pockets and one square onto the back base of the envelope.
Glue a napkin onto the front square, and glue a picture of swans onto the napkin. On a separate piece of watercolor we stamp “Happy Wedding Day.” We tint the picture and the inscription along the edges with the same pad that we stamped the inscription on. Glue the inscription below and sew on a picture with the inscription.
Glue the square onto the base and sew separately the front part and the back part of the envelope separately.
We glue glasses and a bottle inside, and try on decorations outside. We tie an organza bow, make a mini bouquet of stamens and a flower, cut off a strip of lace and a strip of ribbon with roses.
We glue the heart with a glue stick, and glue all the other decorations with a heat gun.
The result is a delicate mint envelope for wedding CDs. On present The best option for newlyweds. You can invest money in it and give it as a gift, and the envelope itself will remain as packaging for wedding CDs.Thank you for your attention and see you all again.
Similar master classes
Particularly interesting
Comments (0)
