Transformable magic wand

Almost all children love to make crafts and most often their own crafts made from paper. It will be especially interesting for a child to engage in creativity if the result is a transforming toy. This is exactly what our magic wand is, the making of which is shown in this master class.

To create it you will need to take:
- an equal number of square sheets of paper of two colors (the length of the stick will depend on their number);
- glue stick.

Our stick will consist of separate modules, for the manufacture of each of which you will need 2 sheets of different colors. Let's start putting together the first module. To do this, take an orange square and make a diagonal fold.

After this, we bend the 2 sides towards the center.

Bend the corners of the resulting triangles in the opposite direction.

Now we will make folds towards the center line.

Let's place the workpiece vertically, bend one edge up.

Then we bend the lower part of the blank of the future stick diagonally to the left.

We bend the upper part of the module down.

Now a diagonal fold needs to be made at the top, bending it to the right side and slightly up.

Using the same principle, we make a module from yellow paper.

Now it's time to connect the two modules into a single whole. To do this, we put the folded yellow element into the orange one.

Now the ends of the orange module need to be brought into the yellow one. First we do it from above.

Then we fill the lower tip of the orange module.

The protruding corners need to be folded up and glued. First we do it on one side.

Then we turn it over and repeat the operation.

To create a stick, you will need to make several of these elements; the length of the craft will depend on their quantity. We made 6 pieces.

Now all that remains is to connect these elements together. We do this by placing one element on top of another and connecting with glue.

In this way we connect all the elements of our transforming wand.

This is what our craft looks like from the side.

To turn it into a long stick, you need to start turning it around its axis. In this case, all elements will begin to straighten out, becoming voluminous.