We disassemble the DSL modem

Today we will disassemble the modem from webstream

Here is a general view of the modem.

Turn the modem over.

Remove the rubber bands that cover the bolts.

Unscrew the bolts.

And remove the cover. Now we have the opportunity to look at the contents of the modem!

Wow she is!

This is where the first Realteck processor is located.

And here is the second, only smaller Realtek processor.

Capacitors, coils, resistors, diodes, etc.

And this LEDs the first 3 are green, and one is white RGB.

Here is the board itself without the cover.

This is the line port.

This is an Ethernet port.

And this is a reset button, a charging socket and a switch.

The board is upside down and has fewer tracks.

And a couple more photos

All! :-)

come back

Similar master classes

Antenna for 3G modem.

We integrate a DSL modem into the PC system unit

Automatically turn on and off from your computer

Increasing the communication range of a Wi-Fi router

Gift flash drive with “satellite modem”

How to disassemble a computer and clean it

Particularly interesting

How to Remove a Broken Bolt or Stud from a Deep Hole

Simple induction heating

The most powerful penetrating lubricant

How to firmly fit a hammer onto a handle without a wedge

LED lamp repair

Full compressor from a refrigerator

Comments (22)

#1 Veent Guests 7 May 2011 23:28
0

I really don’t understand anything, it’s necessary to explain, but the board is similar to all the others and there’s nothing new here, as far as I know, for a “workshop” they charge 35 rubles and it doesn’t take a lot of intelligence to unscrew four bolts, in my opinion it’s necessary to explain
- Answer
#2 mak-andreyimasha Guests 27 April 2011 21:09
1

Just curious to ask. THIS IS WHY WE DISASSEMBLED IT??? To see his insides??? Then it would be better to show what the HADRON COLLIDER consists of!!!
Maybe I don't understand something. but my rating is "-"
- Answer
#3 phantom-111 Guests April 27, 2011 21:18
0

I agree, the point is to take it apart, let me take the watch and take it apart, and what will that do?!
- Answer
#4 feelloff Guests April 27, 2011 21:41
0

If you had sent an article about the collider, they would have shown it. And in this category of the website “WORKSHOP” they take apart interesting things to look inside.
And you have no right to evaluate at all, since your homemade products are not here!!!
- Answer
#5 feelloff Guests April 27, 2011 21:44
0

And I have the same modem on my desk. I've wanted to look inside for a long time - it's a shame to take it apart. Thanks to the author of the article, I looked inside without taking it apart!
Everyone can be smart, but you’re not smart enough to send in your own homemade product.
- Answer
#6 phantom-111 Guests April 28, 2011 11:47
0

feelloff this is your article hahaha, (thanks to the author.... thank yourself hahaha))
admit this nonsense!
- Answer
#7 phantom-111 Guests April 28, 2011 11:49
0

Well, basically the author just stupidly sent the article, but why take it apart??!! wanted to know what's inside? )))ahahahhaah)))
- Answer
#8 Jew Guests 28 April 2011 15:39
0

Actually, this is my article!
- Answer
#9 Jew Guests 28 April 2011 15:45
0

I just have a different login here.
- Answer
#10 feelloff Guests 28 April 2011 17:50
0

Burn yourself at the stake. Tell me what kind of author I am to you?! I just don’t like smart people like you.
- Answer