Homemade, homemade air conditioner

For it you will need: 
1. Old printer. 
2. 4 cooler from computer .
3. Power supply .
4. Insulation tape .
5. Bottle with ice. (We put a plastic bottle of water in the freezer, and after 5-10 hours we get a bottle of ice.)
6. Soldering iron. In principle, you can do without it.

AND So, the printer already includes what I need: 
1. Power supply 220V~24V 

2. The printer body itself.

3. Compartment for collecting condensed water 



Step 1: 

Disassemble the whole printer to hell! 

Step 2: 

Take wire and fasten coolers 2 each! 

Step 3: 

Tie and solder wires coolers 2 each
sequentially! 

Step 4: 

Attach them to the body like a thread! 

Step 5: 

Determine with a tester + And - block
power supply and connect pairs coolers parallel! 

Step 6: 

You can add button ON/OFF 

Step 7: 

This is step 0, put the bottle in the freezer!
Preferably 2 shifts! 

Step 8: 

Now we put it all together and launch! 

Step 9: 

Place the frozen bottle in the center of the printer! 

Step 10: 

We lie down on the sofa, put the air conditioner on top and
Enjoy the effect! 



LET'S HAPPY THE COLD! 



Well, here are my photos of a homemade air conditioner!