Awesome souvenir from a broken glass

Hello! Today I’ll tell you about an unusual and original homemade product made from a broken glass.

I think everyone has had this situation when you accidentally hit a wine glass or glass, it falls off the table and the stem breaks off.

All that remains is to throw it away and go to the store for a new one. Or you can get a little creative and make such a souvenir glass.

Will need

So, I needed:

• Broken glass.
  
• Retro socket.
  
• Electrical plug
  
• Aluminum plate.
  
• Engraver.

Making a souvenir from a broken glass

The first thing I do is assemble the fork. I unscrew the screw, insert the stem of the glass and screw everything back. The easiest part is over.


Now I'm starting to create a sign with the inscription. For this I took an aluminum corner 30*30. And I cut a strip a little larger. Then it will be easier to bend.


Next I sand the cut areas.

The plate is ready. Now you need to bend it and give it the shape of a rosette.

I mark how it will be located on the socket. And I cut off the excess.

I processed the edges with a file and rounded them a little. Next I start engraving. I will use cutters ordered from Aliexpress. I first drew the inscription in pencil and began to trace it with an engraver.

This is my first experience with engraving, so don't judge too harshly. Overall, it turned out well. The next step was to polish the tablet with Goya paste.

I wipe off the remaining paste and admire the result.

I take a sign, apply glue in the center and glue it to the socket. This will secure the plate and make it possible to drill holes for screws.

I mark and drill holes.

I set the final point and tighten the screws.

That's all! The souvenir glass is ready.

If desired, it can be fixed somewhere in one place. For this purpose, the socket has holes at the bottom. Can be used in bars to prevent theft of glasses. I hope you liked my homemade product. Thank you for your attention.

Watch the video