Now you can at least hang a horizontal bar on drywall

Where the locker or other weight is attached to the plasterboard wall, you need to make a special embed from a board in advance. There are several secrets that will make it truly reliable.

Materials:

• 25 mm board of the required width;
  
• rail 60 mm;
  
• wood screws;
  
• self-tapping dowel;
  
• U-shaped hangers.

The process of making a mortgage

Markings are made at the place where the mortgage is attached.


The board itself will expand between the CD rack profiles. In the place opposite to where it fits, short pieces of the slats are inserted into the profile.


Next, trimmings of the UD profile along the width of the embed are prepared. They are screwed on the sides to the posts. Then the mortgage is split between them. It must be secured with self-tapping screws to the UD profile.

Along the transverse mortgage, U-shaped hangers bent in half are screwed on the sides. With a standard step between the rack profile of 60 cm, 4 of them are needed, 2 each on top and bottom. They will connect the mortgage to the wall, which will provide additional rigidity.

As a result, such a mortgage will support a weight of more than 100 kg. In addition, you can screw it to it anywhere horizontally, even opposite the CD profile.However, it is important that the racks themselves do not bend or dangle, so you need to place more crossbars between them.

Watch the video