Crafts. Page 30

Caps from plastic bottles are often collected for crafts. But, if for some reason they could not be used, then you can make dishes from them, for example, a cup.

Plastic bottles have become a part of our lives. They sell almost any liquid from milk to shampoo. Naturally, there are simply heaps of them in any trash can or landfill. In this regard, processing centers for processing have long been built

The housings of power plants, radio equipment, electrical appliances and other similar products must have perforations for ventilation or cooling, otherwise they may overheat and fail due to the heat generated. Making blinds is not difficult and there is no need to

An ordinary awl is a fairly universal tool. They don't do any kind of work.This includes punching wood/metal, piercing soft materials such as leather, fabric or even plastic, marking on metal, etc. Convenience in many ways

In the process of connecting wooden parts with screws, screws or self-tapping screws, sometimes it becomes necessary to install them inconspicuously, either for decorative purposes, or for safety and ease of use in the future. Below we will consider

Today, many products used in everyday life use thin sheet metal - these are cars, refrigerators, washing machines, etc. In the process of repairing them, sometimes there is a need for welding work. But welding thin parts

An interesting video will tell you how much you can earn if you collect plastic bottle caps thrown in the trash. After all, there is a lot of garbage and plastic bottles everywhere. The video will discuss several monetization methods at once.

Experienced craftsmen make rings from coins, preserving the patterns and inscriptions. Our task is simpler: to produce a ring in just one day with a smooth inner surface and a textured outer surface.

Welding aluminum is not as difficult as you might think.It turns out you can weld aluminum without any argon welding! Now, in order to solder aluminum parts, be it a radiator, a bicycle frame or your favorite pan, you don’t have to look for

Even a factory-made portable table saw costs several thousand rubles. In order not to waste money, such a tool can be made from an angle grinder (angle grinder) and at the same time its technical and operational characteristics will be

Making a knife for cutting vegetables into a spiral is very simple. It will only take you a couple of minutes to do this. As a result, you will receive a much-needed kitchen accessory, with which you can delight your family and friends with original dishes.

This master class will teach you how to make tools such as a screwdriver, awl, chisel and much more from available materials from scratch in almost a matter of minutes. Very often there is a need for a specific screwdriver for

When making wooden products, you often have to join parts at an angle of 90 degrees. In order not to waste time on installation and subsequent control of the accuracy of the connection, we will make a simple clamp that will ensure the speed and accuracy of such an operation.

Having a bending machine in your home workshop will be quite useful.It can be used to bend thin sheets of tin and aluminum for a variety of needs.

Using this method, you can join three pipe elements in one corner. The result is a spatial structure that provides maximum strength, an attractive design and a long service life.

Surely each of us at school took labor lessons that were devoted to turning. They sharpened not God knows what, usually they were handles for files, small figures of some kind of candlesticks or something like that. We offer again

The most famous tool for making both straight and curved cuts is a hand jigsaw. But it can also be done mechanically. Moreover, this does not require special skills, materials or costs.

From a few pieces of PVC pipe and a plastic bottle, you can make a simple sink for your bicycle, motorcycle or even car. This type of washing works from a central water supply and its operating principle is as follows: If you simply open the pipe with

A cube in which another cube within a cube is freely located is amazing. And when people find out that it was made on a lathe, they fall into a trance.Do you want to have such a thing to amaze your loved ones with it and make them happy with a wonderful souvenir?

On the Internet you can find a bunch of homemade products made from PVC pipes. It would seem, what can be made from a PVC sewer or ventilation pipe? In fact, this material is simply a godsend for craftsmen. After all, the simplest PVC pipes can quite easily and

Making rivets with a knife lock is not that difficult. This will not take much time, and the only materials you will need are a couple of nails. Such rivets will not need to be flattened; I will form a hat. They themselves will be riveted from

There are never too many drawers, shelves or boxes for storing small tools and hardware in a home workshop. No matter how much you make them, they will still be filled to capacity. And everything would be fine, but sometimes their fixed location in

I would like to address the issue of choosing a tool for a novice carpenter. If a person decides to make something on a weekend or in the evening in the kitchen, what should he have first? What tools, what quality, where is the best place to buy them.

If a knife or some other hand tool for wood is not hardened, then it quickly becomes dull and difficult to work with, and it takes a lot of time to process the material.Usually they are hardened using a forge. But even without him