Different. Page 18

Rotors from broken electric motors can be used as rollers in the manufacture of pipe benders. Their use in this capacity will significantly simplify the assembly of the machine.

Lovers of small domestic animals, such as hamsters, guinea pigs, rats, and similar rodents, probably love their pets and, as far as possible, try to provide them with everything they need. This is what insolent sellers use

If the chimney from the stove indoors is a metal pipe, then most of the heat simply goes into the atmosphere. To delay it, you can install a radiator on the chimney. It will increase the heat transfer of the stove, thereby saving wood or coal.

When working in a workshop, you often need to squeeze something so tightly that a regular vice is not enough for it. In this case, you should think about assembling a press vice.If you have an extra hydraulic jack, it will cost little at all,

If your workshop equipment is limited to just a drill and other basic power tools, you can collect a lot of accessories that will allow you to do much more with it than just drill. Let's look at how to make 5

Plastic bottles can be used to make crafts of varying degrees of usefulness and functionality. We propose to consider 5 devices that definitely work.

An ordinary screw jack can be equipped with an electric drive, and it can lift the car with the press of a button. With such equipment, car maintenance will be faster and easier.

You can put a homemade lock on the gate that will latch when it is closed. This is a fairly simple device that can be made in a couple of hours, and it will last almost forever, since there is nothing in it to break.

There is no more convenient and effective equipment for cleaning metal surfaces from paint and rust than a sandblasting machine.If you have a powerful compressor, you can do it yourself, investing mere pennies in comparison with

When welding gates, railings, balusters, beds and other structures with high demands on the decorative component from a profile pipe, you can try to design the open ends as follows.

This is truly the simplest flasher, which gives a simply stunning lighting effect in total. Take and use any number of LEDs and they will all blink differently. On the eve of the holiday, decorate with such a lighting installation

PET bottles or beer kegs can be used to make transparent tiles. This free roofing material will be very useful when building a greenhouse. They can also cover any outbuildings.

In hard-to-reach places, where you can’t even turn around on your own, working with a large tool is extremely inconvenient and unsafe. For example, working with a hacksaw. There will always be a place where you can’t get to with a regular hacksaw. It won't work even if it's small

An excellent lightweight and convenient hatchet can be made from ordinary rebar lying around the corner. This item is perfect for fishing, hunting or tourism.It's very simple, so even a novice DIYer should be able to do the project.

When using profile pipes as a guide for any machine, you have to spend a lot of time trying to remove the internal protruding seam. If the profile is short, then it can be knocked down with a sharp chisel or sanded with a file; on long ones

Good afternoon. Everyone's favorite holiday, New Year, is just around the corner. Of course, all people decorate their home for the holiday and approach it with imagination. The stores are full of various New Year's decorations. As they say, for every taste and color. But I want

When using welded pipes as a guide, you have to spend a lot of time trying to remove the seam that sticks out inside them. If the tube is short, then it can be knocked down with a chisel or polished, but this is impossible on long workpieces. They need

Probably everyone, turning the handle of a manual meat grinder, thought about how nice it would be to install an electric drive on it. It is not as difficult and expensive as it seems. Let's look at how to do this.

If you don’t have enough space to store a large purchased garden wheelbarrow, you can make it foldable with your own hands. So it will turn out even cheaper. Of course, you can’t use it for concrete, but it’s suitable for soil, leaves and sand.

For quick, comfortable drilling at right angles, you can make a drill stand for a drill. Many parts for this are easy to find at a metal receiving station, so the cost of a homemade product is several times lower than its factory counterpart.

Many people feel sorry for throwing away aluminum soda or beer cans, especially if they are thick-walled. Using this idea, you can make cork plugs for them. The resulting opening jars can be used for

When assembling various frames from a profile pipe, it is most convenient to use a welding machine, but in its absence it is quite possible to make do with ordinary rivets. They will even help in the corners of the connection of three pipes, the main thing is to do the correct trimming.

If there is no pulley of the required diameter for a belt drive, it can be turned at home, even without a lathe. At the same time, its quality and balance will be almost perfect.

If you have a T-track embedded in your workbench, it can be used to install sliding clamps. They are much more convenient than clamps, since they are placed not only on the edge, but also in any part of the tabletop. You can make them yourself.